Página principal de Productos
Amplificadores de línea y extensores
Extensores USB
Extensores HDMI Extensores DVI Extensores DisplayPort Extensores HD‑SDI, 3G‑SDI y 12G‑SDI Amplificadores de línea y extensores VGA y RGB Amplificadores de línea y extensores AV Extensores inalámbricos
FOX USB Extender Plus
FOX USB Extender Plus Serie UCS 900 Serie USB Extender Plus

Imprimir

Profesional

FOX USB Extender Plus

Extensor de fibra óptica para periféricos USB

Características principales

Extiende periféricos USB a muy largas distancias a través de cableado de fibra óptica
Admite dispositivos desde USB 2.0 a 1.0 y dispositivos USB 3.0 que pueden funcionar con tasas de datos USB 2.0 hasta 480 Mbps
Receptor que dispone de un hub de cuatro puertos integrado con 5 V, 500 mA disponibles en cada puerto
Emulación de periféricos
Indicadores LED del estado en tiempo real para la resolución de problemas y la supervisión
Compatible con las matrices de conmutación FOX Matrix de Extron para sistemas de distribución de la señal de hasta 1000x1000 y mayores
Todas las características

Previous Next

Galería de imágenes

Visión global interactiva

Vídeos destacados

Descripciones para consultores

Nota: FOX USB Extender no es compatible con los productos FOX USB Extender Plus.

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

FOX USB Extender Plus de Extron es un conjunto de transmisor y receptor de fibra óptica para la transmisión a larga distancia de señales USB a través de cableado de fibra óptica. Está diseñado para ofrecer fiabilidad, un rendimiento excepcional, y utiliza la tecnología totalmente digital de Extron para ofrecer una señal perfecta. Este extensor de fibra óptica es compatible con dispositivos USB 3.0, 2.0, 1.1 y 1.0 con tasas de transferencia de datos hasta 480 Mbps. FOX USB Extender Plus está diseñado especialmente para sistemas AV, e incluye muchas funciones de fácil integración, como la emulación de periféricos, un hub de cuatro puertos activos que suministra 5 V, 500 mA por puerto, y supervisión del sistema en tiempo real. Las carcasas compactas de perfil reducido permiten una instalación discreta.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

FOX USB Extender Plus

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

FOX USB Extender Plus -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.