| CrossPoint 300 42 HVA |
|
| Video |
|---|
| Routing | 4 x 2 matrix |
| Gain | Unity |
| Bandwidth | 300 MHz (-3 dB), fully loaded |
| 0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz | No more than +0.8 dB to -0.8 dB |
| Crosstalk | -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz |
| Switching speed | 200 ns (max.) |
|
| Video input |
|---|
| Number/signal type | 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | 4 x 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
|
| Video output |
|---|
| Number/signal type | 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors | 2 x 5 BNC female |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0 V to 2.0 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset | ±10 mV with input at 0 offset |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs |
| Output type | RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level | 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level | AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
| Input impedance | 75 or 510 ohms, switchable |
| Output impedance | 75 ohms |
| Max. input voltage | 5.0 Vp-p |
| Max. propagation delay | 30 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio |
|---|
| Routing | 4 x 2 stereo matrix |
| Gain | Unbalanced output: -6 dB; balanced output 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB, balanced, at maximum output (21 dBu) (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >90 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 4 stereo, balanced/unbalanced |
| Connectors | (4) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >10k ohm, balanced/unbalanced, DC coupled |
| Nominal level | 0 dBu (775 mV) |
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 0.01% THD+N |
| Input gain adjustment | -18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232 or front panel |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — audio models only |
|---|
| Number/signal type | 2 stereo, balanced/unbalanced |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 0.10% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 0.10% THD+N |
|
| Control/remote — switcher |
|---|
| Serial host control port | 1 RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| RS-232 | 9-pin female D connector: 2 = TX, 3 = RX, 5 = GND |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 17.5" W x 9.5" D (1U high, full rack wide)
(4.4 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors, width excludes rack ears.) |
| Product weight | 4.9 lbs (2.2 kg) |
| Shipping weight | 8 lbs (4 kg) |
| DIM weight (International) | 9 lbs (5 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, CUL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-102408-D12) |