El DA6 YUV A de Extron es un amplificador de distribución de audio digital y HDTV/vídeo por componentes con una entrada y seis salidas para la distribución de señales de DVD y HDTV. Acepta y distribuye RGBS o RGsB, RsGsBs, vídeo por componentes, S-Video, vídeo compuesto y audio digital en conectores BNC hembra. También dispone de conmutador DIP seleccionable para CA o CC. Con 350 MHz (-3dB) de ancho de banda de vídeo, el DA6 YUV A es perfecto para mantener la integridad de la señal en distancias de cable largas. El DA6 YUV A incluye una fuente de alimentación interna universal y se encuentra alojado en una carcasa de metal de 1U y ancho rack completo para montarse fácilmente.

Especificaciones

DA6 YUV A
Video
Gain	Unity (0 dB)
Peaking	0 dB
Bandwidth	350 MHz (-3 dB), fully loaded
Differential phase error	<1.0° at 5 MHz
Differential gain error	<1.0% at 5 MHz
Video input
Number/signal type	1 RGBS (only when the digital audio channel is not used), RGsB, RsGsBs, HDTV component video, S-video, composite video
Connectors	3 or 4 female BNC (the fourth can be used for digital audio input instead of video sync)
Nominal level (at unity gain)	1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB, for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 180 kHz
Vertical frequency	15 Hz to 170 Hz
Return loss	<-38 dB @ 5 MHz
DC offset (max. allowable)	5.0 V (in AC coupling mode)
Input coupling	AC/DC, switch-selectable
Video output
Number/signal type	6 RGBS (only when the digital audio channel is not used), RGsB, HDTV component video, S-video, composite video (follows input type)
Connectors	6 x 4 female BNC
Nominal level	1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB, for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 Vp-p to 1.5 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-44 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset
Sync
Input/output type	RGBS (only when the digital audio channel is not used), RGsB, RsGsBs, bi-level and tri-level sync
Input level	Analog or TTL: 0.5 V to 5 Vp-p
Output level	TTL: 5 Vp-p, unterminated
Input impedance	510 ohms
Output impedance	75 ohms
Max. input voltage	5.0 Vp-p
Max. propagation delay	35 ns
Max. rise/fall time	4 ns
Polarity	Positive or negative (follows input)
Digital audio
NOTE     Digital audio input/output is available when RGBS is not used as the video input signal.
Sampling rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Digital audio input
Number/signal type	1 Dolby® Digital, DTS, AES/EBU
Connectors	1 female BNC
Impedance	510 ohms
Nominal level	1 V (for consumer level) or 2 V (for professional level)
Min./max. input levels	0.5 V to 5 Vp-p
Digital audio output
Number/signal type	6 Dolby Digital, DTS, AES/EBU
Connectors	6 female BNC
Impedance	75 ohms
Output level	2.5 Vp-p, 75 ohms terminated
Max. propagation delay	35 ns
Max. rise/fall time	4 ns
Polarity	Positive or negative (follows input)
General
Power	100 VAC to 240 VAC, 50-60 Hz, 10 watts, internal
Mounting
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.5" W x 8.5" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 21.6 cm D) (Depth excludes connectors.)
Product weight	3.9 lbs (1.8 kg)
Shipping weight	7 lbs (4 kg)
(7.6-083109-D9)