| DTP2 T 201 D |
|
 specification |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, or 60 fps |
| Chroma sampling1 | 4:4:4 |
| Color bit depth1 | 8 bits per color |
| Signal Type | HDMI 1.4, 2.0, HDCP 1.4, 2.3 |
| Max. video data rate | 18 Gbps (6 Gbps per color) |
| NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. |
|
|
| Video |
|---|
| NOTE | Extron strongly recommends compatibility testing while designing, and before installing, any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information. |
|
| Maximum data rate | 18 Gbps (6 Gbps per color) |
| Maximum pixel clock | 600 MHz |
| Resolution range | 2560x1600 @ 60 Hz or 1080p @ 60 Hz,
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
UHD (3840x2160) @ 60 Hz |
| Color bit depth | 8 bits — subject to the maximum data rate limit |
| Formats | RGB digital video |
| Standards | DVI 1.0; HDMI 1.4, 2.0; HDCP 1.4, 2.3; CEA-861-F |
|
| Video input |
|---|
| Number/signal type | 1 single link HDMI (or DVI-D*) |
| Connectors | 1 female HDMI type A |
| Horizontal frequency | 15 kHz to 150 kHz |
| Vertical frequency | 24 Hz to 120 Hz for resolutions up to 18 Gbps |
| NOTE | *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
|
| Interconnection between transmitter and receiver |
|---|
| Connectors | 1 female RJ-45 per unit |
| Termination standards | TIA/EIA T568B |
| Signal transmission distance | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable |
| Cable requirements | Solid conductor, 24 AWG or better |
| Cable recommendations | 400 MHz bandwidth STP (shielded twisted pair) |
| NOTE | Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. |
|
|
| Audio input |
|---|
| Number/signal type | 1 digital embedded audio on HDMI |
| Connectors | 1 female HDMI |
|
| General |
|---|
| Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts |
| Power consumption | |
| Transmitter | |
| Device | 12 VDC
Remote Power: OFF= 5.3 watts, ON= 20.0 watts
|
| Device and power supply | 100-240 VAC, 50-60 Hz
Remote Power: OFF= 6.2 watts, ON= 23.4 watts |
| NOTE | The transmitter can be powered either locally by an external power supply or remotely by a receiver on the other end of the twisted pair cable. |
|
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vent holes |
| Thermal dissipation | |
| Device | Remote Power: OFF = 18.0 BTU/hr, ON = 23.9 BTU/hr |
| Device and power supply | Remote Power: OFF = 21.1 BTU/hr, ON = 35.3 BTU/hr |
| Mounting | |
| Furniture or wall mount | Yes, with a 1 gang wall box or mud ring |
| Enclosure type | Metal |
| Enclosure dimensions | |
| Faceplate | 2.6" H x 1.3" W x 0.3" D
(66 mm H x 33 mm W x 6 mm D) |
| Device | 2.8" H x 1.7" W x 1.9" D
(71 mm H x 43 mm W x 48 mm D) |
| NOTE | Overall height is 4.2" (107 mm), including mounting tabs. Mounting holes are 3.2" (82 mm) apart on center. Depth excludes connectors. Fits the opening in a 1 gang decorator wallplate). |
|
| Product weight | 0.38 lbs (0.17 kg) |
| Regulatory compliance | CE, c-UL, UL, CE**, C-tick, FCC Class A**, ICES, VCCI, KCC, RoHS
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply. |
| NOTE | **CE and FCC testing is conducted with STP cable. |
|
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (6046-D5) |