| DVS 406 A, DVS 406 AD |
| | |
|
| Video input |
|---|
| Number/signal type | 1 RGBHV, RGBS, RGsB pass-through, HD component video color space |
| | 1 RGBHV, RGBS, RGsB pass-through, progressive/interlaced component video |
| | 3 S-video, composite video |
| | 1 SDI (optional) |
| Connectors | 1 x 5 BNC female (pass-through, HD color space)
1 x 5 BNC female (pass-through, progressive/interlaced)
3 x 2 BNC female (S-video, composite video)
1 BNC female (SDI – optional) |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for U and V of component video, and for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | NTSC, PAL, NTSC 4.43, SECAM |
| Vertical frequency | NTSC, PAL, NTSC 4.43, SECAM |
| Resolution range | NTSC, PAL, NTSC 4.43, SECAM |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
|
| Video processing |
|---|
| Decoder | 9 bit digital |
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz (interlaced signals)
24 bit, 8 bits per color; 27 MHz (480p signals) |
| Colors | 16.78 million |
|
| Video output |
|---|
| Number/signal type | 2 RGBHV, RGBS, RGsB |
| Connectors | (1) 15-pin HD female
1 x 5 BNC female |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0 V to 0.7 Vp-p |
| Impedance | 75 ohms |
| Scaled resolutions | 640x4801,3,4,5,6, 800x6001,3,4,5,6, 848x4801,3,4,5,6, 852x4801,3,4,5,6, 1024x7681,3,4,5,6, 1280x7682,5,6, 1280x10241,3,4,5, 1360x7651,3,4,5,6, 1365x10241,3,4,5, 1400x10501,3,5, HDTV 480p3,5, 576p1,5, 720p3,5, 1080p3,5, and 1080i1,3,5
1 = at 50 Hz 2 = at 56 Hz 3 = at 60 Hz 4 = at 75 Hz
5 = locked to the current input's vertical refresh rate (Accu-RATE Frame Lock)
6 = True Rate |
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV maximum with input at 0 offset |
| Switching type | Triple-Action, seamless between RGB input #1 and video |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB |
| Output type | RGBHV, RGBS, RGsB |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 0.0 V to 1.0 Vp-p |
| Output level | 0.0 V to 7.0 Vp-p or TTL (5.0 Vp-p), unterminated |
| Input impedance | 75 ohms |
| Output impedance | 75 ohms |
| Max input voltage | 5 Vp-p |
| Max. propagation delay | 20 ns |
| Polarity | Positive or negative (selectable) |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at +19.5 dBu input, +21 dBu output, balanced/unbalanced |
| S/N | >90 dB at maximum output (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz |
| Stereo channel separation | >80 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 6 stereo, balanced/unbalanced |
| Connectors | (6) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >50k ohms unbalanced, 25k ohms balanced, DC coupled |
| Nominal level | Configurable: -60 dBV (1 mVrms), +4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms), -10 dBV (316 mVrms), ‑20 dBV (100 mVrms) |
| Maximum input level | +19.5 dBu (balanced/unbalanced) at 1%THD+N |
| Input gain adjustment | -15 dB to +9 dB, adjustable per input via RS-232 or front panel |
| NOTE | | 0 dBu = 0.775V, 0 dBV = 1V, 0 dBV ≈ 2 dBu. |
|
|
| Audio output |
|---|
| Number/signal type | 1 stereo, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms, unbalanced; 100 ohms, balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced at 1%THD+N |
| Maximum level (600 ohm) | >+15 dBu, balanced at 1%THD+N |
|
| Control/remote — video scaler/scan converter |
|---|
| Serial control port | RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR |
| Program control | Extron's control program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power | 100VAC to 240VAC, 50/60 Hz, 30 watts, internal, autoswitchable |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount | Yes, with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 17.5" W x 12" D (1U high, full rack wide)
4.4 cm H x 44.4 cm W x 30.5 cm D |
| Product weight | |
| DVS 406A | 6.5 lbs (2.9 kg) |
| DVS 406AD | 6.8 lbs (3.1 kg) |
| Shipping weight | 11 lbs (5 kg) |
| DIM weight, international | 12 lbs (6 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| NOTE | | All nominal levels are at ±10% |
|
| NOTE | | Specifications are subject to change without notice. |
|
| (7.51-120804-D8) |