| P/2 DA2 WM F Series |
|
| Video |
|---|
| Gain | Switchable: 0 dB, +1.2 dB, +2.2 dB (0.7 V, 0.8 V, or 0.9 V when input is 0.7 V and the gain/peaking switch is set to Unity, 50%, or 100%, respectively) |
| Bandwidth | 300 MHz (-3 dB), fully loaded |
|
| Video input |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter) |
| Connectors | 1 female 15-pin HD |
| Pin connections | ID bits on pins 4 and 11: selectably terminated to ground or passed through to local monitor output (loop-through)
ID bits on pins 12 and 15: passed through to local monitor output (loop-through)
Pin 9: the connection is passed through to local monitor output (loop-through) |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | Analog: 0.4 V to 1.4 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 135 kHz |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | <-38 dB @ 5 MHz |
| DC offset (max. allowable) | 200 mV |
|
| Video output |
|---|
| Number/signal type | 2 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter) |
| Connectors | 2 female 15-pin HD (1 display, 1 local monitor) |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain |
| Minimum/maximum levels | 0.4 V to 1.4 Vp-p |
| Impedance | 75 ohms |
| Return loss | <-40 dB @ 5 MHz |
| DC offset | ±5 mV maximum |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Input level | 3.0 V to 5.0 Vp-p |
| Output level | TTL: 5.0 Vp-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 40 ohms, typical |
| Max. propagation delay | 18.8 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB, balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 kHz, balanced, at maximum output |
|
| Audio input |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connectors | (1) 3.5 mm female stereo jack, 2 channel; tip (L), ring (R), sleeve (GND) |
| Impedance | >5k ohms unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mV) |
| Maximum level | +8.5 dBu (unbalanced) at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 stereo, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Maximum level (Hi-Z) | >+15 dBu, balanced or unbalanced at 1%THD+N |
| Maximum level (600 ohm) | >+9 dBu, balanced or unbalanced at 1%THD+N |
|
| General |
|---|
| External power supply (included) | 100 to 240 VAC to 12 VDC, 1 A external power supply, regulated |
| Power input requirements | 12 VDC, 0.2 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Furniture or wall mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | |
| P/2 DA2 WM F | |
| Plate | 4.5" H x 4.6" W x 0.1" D
(11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang) |
| P/2 DA2 WM F AAP | |
| Plate | 4.5" H x 8.3" W x 0.1" D
(11.4 cm H x 21.1 cm W x 0.3 cm D) (4 gang) |
| P/2 DA2 WM EC F | |
| Plate | 3.1" H x 4.0" W x 0.1" D
(7.9 cm H x 10.2 cm W x 0.3 cm D) (Euro Channel) |
| P/2 DA2 WM EC F AAP | |
| Plate | 3.1" H x 7.7" W x 0.1" D
(7.9 cm H x 19.5 cm W x 0.3 cm D) (Euro Channel) |
| All models | |
| Box | 2.6" H x 3.7" W x 1.6" D
(6.6 cm H x 9.4 cm W x 4.1 cm D) |
| Product weight | |
| P/2 DA2 WM F | 0.4 lbs (0.2 kg) |
| P/2 DA2 WM F AAP | 0.6 lbs (0.3 kg) |
| P/2 DA2 WM EC F | 0.3 lbs (0.1 kg) |
| P/2 DA2 WM EC F AAP | 0.7 lbs (0.3 kg) |
| Shipping weight | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, FCC Class A |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-082709-D8) |