| PVT Series Wallplates (for PVS 407D) |
| NOTE | These transmitter wallplates are compatible with an Extron PVS 407D Switcher only. They are not compatible with other models of twisted pair receivers or PVS switchers. DO NOT connect to a data network. |
|
| NOTE | Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
|
 specification — HDMI inputs |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, or 60 fps |
| Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 |
| Color bit depth1 | 8 bits per color |
| Signal Type | HDMI 1.4, HDCP 1.4 |
| Max. video data rate | 10.2 Gbps (3.4 Gbps per color) |
| NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. |
|
| NOTE | The PVS 407D must have firmware version 2.00 or greater for 4K support on all HDMI inputs. |
|
| NOTE | The PVS 407D must have firmware version 4.00 or greater for PVT HD RGB wallplate support. |
|
|
| Video — digital |
|---|
| Maximum pixel clock | 300 MHz |
| Resolution range | Up to 4096x2160 @ 30 Hz, 3840x2160 @ 30Hz,
4K/UHD @ 60 Hz with 4:2:0 Chroma subsampling |
| Formats | RGB and YCbCr digital video |
| Standards | DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E |
|
| Video input and loop-through |
|---|
| Number/signal type | |
| PVT HD | 2 single link HDMI (or DVI-D with appropriate HDMI-DVI adapter) input |
| PVT HDMI | 2 single link HDMI (or DVI-D with appropriate HDMI-DVI adapter) input |
| PVT HDMI RGB | 1 single link HDMI (or DVI-D with appropriate HDMI-DVI adapter) input
1 analog VGA-UXGA RGBHV, RGBS input
1 buffered analog RGBHV, RGBS local monitor loop-through |
| PVT HD RGB | 1 single link HDMI (or DVI-D with appropriate HDMI-DVI adapter) input
1 analog VGA-UXGA RGBHV, RGBS input
|
| Connectors | |
| PVT HD | 2 female HDMI type A |
| PVT HDMI | 2 female HDMI type A |
| PVT HDMI RGB | 1 female HDMI type A
2 female 15-pin HD (1 for input, 1 for loop-through) |
| PVT HD RGB | 1 female HDMI type A
1 female 15-pin HD |
| Nominal level | 0.7 Vp-p for analog RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
TTL: 0.0 V to 5.0 Vp-p |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 130 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | 30 dB @ 5 MHz |
| DC offset (max. allowable) | 0.25 V |
|
| Sync — analog RGB, PVT HDMI RGB and PVT HD RGB only |
|---|
| Input type | RGBHV, RGBS |
| Input level | 3.5 V to 5.5 Vp-p, unterminated |
| Input impedance | 510 ohms |
|
| Interconnection between PVT wallplates and PVS switcher |
|---|
| Number/signal type | 1 digital proprietary signal |
| Connector | 1 female RJ-45 |
| Termination standard | TIA/EIA T568B
Extron cables included with the system kits are T568B |
| Signal transmission distance | Up to 150' (46 m) for 2K rate, or up to 130' (40 m) for 4K/30Hz, using Extron XTP DTP 24 cable |
| Cable requirements | Solid conductor, 24 AWG |
| Cable recommendations | 400 MHz bandwith STP (shielded twisted pair) cable |
| NOTE | Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. |
|
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output +6 dB |
| Frequency response | 20 Hz to 20kHz, ±0.5 dB |
| THD + Noise | <0.03%, 20Hz to 20 kHz, at nominal level |
| S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) |
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | |
| PVT HD | 2 analog stereo, unbalanced, or 2 digital audio embedded on the HDMI signal |
| PVT HDMI | 2 analog stereo, unbalanced, or 2 digital audio embedded on the HDMI signal |
| PVT HDMI RGB | 2 analog stereo, unbalanced, or
1 digital audio embedded on the HDMI signal and 1 analog stereo
1 analog pass-through |
| PVT HD RGB | 2 analog stereo, unbalanced, or
1 digital audio embedded on the HDMI signal |
| Connectors | |
| PVT HD | (2) 3.5 mm stereo mini audio jacks (tip, ring, sleeve)
2 female HDMI type A (embedded on the HDMI signal) |
| PVT HDMI | (2) 3.5 mm stereo mini audio jacks (tip, ring, sleeve)
2 female HDMI type A (embedded on the HDMI signal) |
| PVT HDMI RGB | (2) 3.5 mm stereo mini audio jacks (tip, ring, sleeve)
1 female HDMI type A (embedded on the HDMI signal)
(1) 3.5 mm female captive screw connector, 3 pole (pass-through) |
| PVT HD RGB | (2) 3.5 mm stereo mini audio jacks (tip, ring, sleeve)
1 female HDMI type A (embedded on the HDMI signal) and 1 analog stereo |
| Impedance | >10k ohms, unbalanced |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +6 dBV, (unbalanced) |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output to a PVS switcher — PVS 407D |
|---|
| Number/signal type | 1 digital proprietary signal |
| Connector | 1 female RJ-45 |
|
| Audio output, pass-through - PVT HDMI RGB only |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connector | (1) 3.5 mm mini audio jack (tip, ring, sleeve) |
|
| Communications — external device (pass-through), PVT HDMI and PVT HDMI RGB only |
|---|
| IR control port | (1) 3.5 mm captive screw connector, 2 pole
TTL level (0 to 5 V) unmodulated or modulated infrared control up to 40 kHz |
|
| General |
|---|
| Power | Supplied by the PVS 407D switcher |
| Power input requirements | 12.0 VDC, 1.0 A, supplied by the PVS 407D switcher |
| Power consumption | |
| PVT HD | 5 watts, 12 VDC |
| PVT HDMI RGB | |
| Device | 7 watts, 12 VDC |
| PVT HDMI | |
| Device | 7 watts, 12 VDC |
| PVT HD RGB | |
| Device | 6 watts, 12 VDC |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Thermal dissipation | |
| PVT HD | 15.5 BTU/hr |
| PVT HDMI RGB | |
| Device | 9.3 BTU/hr |
| PVT HDMI | |
| Device | 10.0 BTU/hr |
| PVT HD RGB | |
| Device | 9.0 BTU/hr |
| Mounting | |
| Furniture or wall mount | Yes, with the included decorator-style wallplate |
| Enclosure | Metal |
| Enclosure dimensions | |
| Faceplate | 2.6" H x 3.2" W x 0.2" D
(6.6 cm H x 8.1 cm W x 0.6 cm D)
(Fits the openings in a 2-gang decorator-style wallplate) |
| Device | 2.7" H x 3.5" W x 1.9" D
(6.9 cm H x 8.9 cm W x 4.8 cm D)
(Depth excludes connectors, height excludes mounting tabs.
Allow at least 3.0", 7.6 cm, depth in the wall or furniture.) |
| NOTE | Height is 4.2" (10.4 cm) including mounting tabs. |
|
| Product weight | 0.6 lbs (0.3 kg) |
| Regulatory compliance | **CE, C-Tick, c-UL, **FCC Class A, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE |
| NOTE | ** CE and FCC testing is conducted with STP (shielded twisted pair) cable. |
|
| Warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (6149-D4) |