RGB 203 Rxi VTG RETIRADO

Interfaz universal de tres entradas con audio y generador de patrones de vídeo incorporado
Características principales
  • Compatible con señales VGA-QXGA, Mac, Sun® y SGI®
  • Ancho de banda de vídeo RGB de 300 MHz (–3 dB)
  • Generador de patrones de vídeo incorporado
  • Procesamiento de sincronismos digital avanzado mejorado (ADSP™)
The Extron RGB 203 Rxi VTG
Modelo Descripción de la versión Referencia
 RGB 203 Rxi VTG Three Input Interface w/Video Test Gen. 60-509-01 RETIRADO

Este producto ha sido retirado.

Part number 60-509-01 has been retired.

Características

  • Compatible con señales VGA-QXGA, Mac, Sun® y SGI®
  • Ancho de banda de vídeo RGB de 300 MHz (–3 dB)
  • Generador de patrones de vídeo incorporado
  • Procesamiento de sincronismos digital avanzado mejorado (ADSP™)
ACCESORIOS OPCIONALES
  MBD 129 Kit de montaje a través del escritorio para carcasas de 1/4 o 1/2 ancho de rack, de dos piezas
  RSU 129 Kit de bandeja de rack universal para productos con 24 cm de profundidad

Especificaciones

RGB 203 Rxi, RGB 203 Rxi VTG
Video
   Routing 3 x 1 router
   Gain 0.5 V to 1.45 Vp-p
   Bandwidth 300 MHz (-3 dB)
   Rise time 1.5 ns
Video input
   Number/signal type 3 analog RGBHV, RGBS, RGsB, RsGsBs
   Connectors 3 female 15-pin HD
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 40 Hz to 140 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 4 V
Video output
   Number/signal type 1 analog RGBHV, RGBS, RGsB
   Connectors 6 BNC female
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels 0.3 V to 1.30 Vp-p
   Impedance 75 ohms
   Return loss -30 dB @ 5 MHz
   DC offset ±5 mV maximum with input at 0 offset
Sync
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Output type RGBHV, RGBS, RGsB
   Input level 2 V to 5.5 Vp-p with ±0.2 VDC offset max.
   Output level TTL: 4V to 5V p-p, unterminated
   Input impedance 510 ohms
   Output impedance 75 ohms
   Max. propagation delay 85 ns
   Max. rise/fall time 2 ns
   Polarity RGBHV: tracks polarity (or force negative sync via internal jumper)
RGBS, RGsB: negative
Audio
   Routing 2 x 1 stereo router
   Gain Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >90 dB at rated maximum output (17 dBu), balanced (unweighted)
   Crosstalk <-90 dB @ 1 kHz, fully loaded
   Stereo channel separation >90 dB @ 1 kHz
Audio input
   Number/signal type 2 PC level stereo, unbalanced
   Connectors (2) 3.5 mm mini audio jacks (female)
   Impedance >10k ohms, unbalanced, DC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +8.5 dBu, (balanced or unbalanced) at 1% THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 1 buffered stereo (2 channel) or mono, balanced/unbalanced
   Connectors (1) 3.5 mm, captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+14 dBu, balanced at 1% THD+N
   Maximum level (600 ohm) >+8.5dBm, balanced at stated %THD+N
Control/remote — interface
   Serial control port RS-232, 9-pin female D connector (also used for contact closure)
   Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
   Contact closure (1) 9-pin female D connector (also used for RS-232)
   Contact closure pin configuration 1 = input #1, 4 = input #2, 5 = GND
   Program control Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS)
General
   Input power 100 VAC to 240 VAC, 50/60 Hz, 18 watts, internal, autoswitchable
   MBC power jacks 9.0 VDC, 0.15 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing
   Rack mount Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01
Also furniture mountable with an optional under-desk mounting kit (part #70-077-01) or through-desk mounting kit (part #70-077-02)
   Enclosure type Metal, vented
   Enclosure dimensions 1.75" H x 8.75" W x 8.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 20.3 cm D; with rear BNCs, D = 8.4" (21.3 cm)
(Depth excludes knobs.)
   Product weight 
      RGB 203 Rxi 2.2 lbs (1.0 kg)
   Shipping weight 5 lbs (3 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Listings UL, CUL
   Compliances CE, FCC Class A, VCCI, AS/NZS, ICES
   MTBF 30,000 hours
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.51-110405-D5)

Diagrama

RGB 203 Rxi VTG System Diagram

Ilustraciones

RGB 203 Rxi VTG Panel Drawing