| SW2 DVI A, SW4 DVI A |
| NOTE | *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. |
|
|
| Video |
|---|
| Maximum bit rate | 4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock | 165 MHz |
| Resolution range | Up to 1920x1200 or 1080p @ 60 Hz |
| Formats | RGB and YCbCr digital video |
| Standards | DVI 1.0, HDMI 1.2 |
|
| Video input |
|---|
| Number/signal type | 2 or 4 single link DVI-D (or HDMI*) |
| Connectors | 2 or 4 female DVI-I |
| Equalization | +6 dB or +12 dB, switch selectable for each input |
|
| Video output |
|---|
| Number/signal type | 1 single link DVI-D (or HDMI*) |
| Connectors | 1 female DVI-I |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.01% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
| Crosstalk | <-45 dB @ 20 kHz, -72 dB @ 1 kHz or below |
| Stereo channel separation | >80 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 2 or 4 stereo, unbalanced |
| Connectors | (2 or 4) 3.5 mm mini audio jacks (tip = L, ring = R, sleeve = GND) |
| Impedance | >10k ohms unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +8.2 dBV, unbalanced at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 stereo, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Maximum level (Hi-Z) | >+16.5 dBu, balanced; >8.2 dBV, unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >+10.4 dBm, balanced; >7.1 dBm, unbalanced at 1% THD+N |
|
| Control/remote — switcher |
|---|
| Serial control port | (1) RS-232, 3.5 mm captive screw connector, 5 pole (shared with autoswitching control) |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 1 = TX, 2 = RX, 3 = GND |
| Contact closure | (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232) |
| Contact closure pin configurations | 4 and 5 shorted together enable autoswitch mode. |
| IR controller module | IR 102 Remote Control, optional (#70-224-10)
30' maximum, 40 degrees off axis |
| Program control | Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements | 12 VDC, 0.7 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10); or 1U, 3.5" deep VersaTools® rack shelf (RSF 123, #60-190-20; RSB 123, 60-604-20); or with optional VersaTools Back of the Rack Mount Kit, part #70-367-01 (MBB 100). |
| Furniture mount | Yes, with optional MBU 123 VersaTools Mini Under Desk Mounting Kit,
#70-212-01 |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight | 0.6 lbs (0.3 kg) |
| Shipping weight | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-042308-D5) |