| ZRTP Pro Series |
|
| Display |
|---|
| ZRTP Pro 725M and ZRTP Pro 725T | |
| Screen type | TFT Active matrix color LCD |
| Size | 7" (17.8 cm), measured diagonally |
| Resolution | 1024x600 (WSVGA) |
| Pixel density | 170 PPI |
| Aspect ratio | 17:10 |
| Color depth | 24 bit, 16.7 million colors |
| Transparency | 8 bit |
| Brightness | 420 nits (cd/m2) |
| Contrast | 700:1 |
| Backlight | LED |
| Viewing angle | ±75° horizontal, +70°/-75° vertical |
| Touch screen | Capacitive |
| ZRTP Pro 1025M and ZRTP Pro 1025T | |
| Screen type | TFT Active matrix color LCD |
| Size | 10.1" (25.7 cm), measured diagonally |
| Resolution | 1280x800 (WXGA) |
| Pixel density | 149 PPI |
| Aspect ratio | 16:10 |
| Color depth | 24 bit, 16.7 million colors |
| Transparency | 8 bit |
| Brightness | 420 nits (cd/m2) |
| Contrast | 800:1 |
| Backlight | LED |
| Viewing angle | ±85° horizontal, ±85° vertical |
| Touch screen | Capacitive |
|
| Storage |
|---|
| SDRAM | 2 GB |
| Flash | 8 GB |
|
| Ethernet |
|---|
| Connectors | 1 female RJ-45 connector |
| Data rate | 10/100/1000Base-T, half/full duplex with autodetect |
| Protocols | ARP, DHCP, DNS, HTTP (redirect), HTTPS, ICMP, NTP, SFTP, SSH, TCP/IP, UDP/IP |
| Default settings | Link speed and duplex level = autodetected
DHCP = enabled (default) |
|
| Software |
|---|
| Configuration software | Global Configurator Plus and Professional; GUI Designer |
| Programming software | ControlScript Deployment Utility |
| Control apps | Extron Control |
| Utilities | Toolbelt |
|
| USB |
|---|
| Quantity/type | 1 high-speed USB 2.0 |
| Connectors | |
| ZRTP Pro 725M and 1025M | 1 Micro-B receptacle |
| ZRTP Pro 725T and 1025T | 1 USB type A receptacle |
| Standards | USB 2.0, USB 1.1, USB 1.0 compatible |
| Max. data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) |
|
| Digital input – ZRTP Pro 725M and ZRTP Pro 1025M only |
|---|
| Quantity/type | 1 digital input (configurable) |
| Connectors | (1) 3.5 mm captive screw connector, 2 pole |
| Digital inputs | |
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC |
| Input impedance | ≥10k ohms |
| Programmable pullup | 1k ohms to +5 VDC |
| Threshold low to high | 2.8 VDC |
| Threshold high to low | 2.0 VDC |
| Pin configuration | 1 = Digital input, 2 = Gnd |
|
| Audio output |
|---|
| Speaker output | |
| ZRTP Pro 1025M | 2 mono, 89 dB max. SPL @ 0.1 m |
| ZRTP Pro 725M, 725T, and 1025T | 1 mono, 89 dB max. SPL @ 0.1 m |
| Frequency response | 750 Hz to 20 kHz, ±5 dB |
| Playback format(s) | |
| Container format | WAV (Microsoft RIFF) |
| Encoding | LPCM (uncompressed) |
| Bit depth | Unsigned 8-bit
Signed 16-bit
Signed 24-bit
Signed 32-bit |
| Sampling rate | Up to 192 kHz |
| Audio channels | Mono or stereo |
|
| General |
|---|
| Sensors | Motion
Light |
| Power supply | Not included |
| Power input requirements | Power over Ethernet (PoE 802.3af, class 3) |
| Power consumption — Power injector (XTP PI 100) |
| ZRTP Pro 725M | |
| Device | 8.5 watts |
| Device and power injector | 11.6 watts |
| ZRTP Pro 725T | |
| Device | 8.2 watts |
| Device and power injector | 10.6 watts |
| ZRTP Pro 1025M | |
| Device | 12.9 watts |
| Device and power injector | 14.7 watts |
| ZRTP Pro 1025T | |
| Device | 11.5 watts |
| Device and power injector | 13.6 watts |
| Auxiliary power output | |
| USB | 5 VDC, 275 mA |
| Ambient temperature/humidity | Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on back |
| Thermal dissipation — Power injector (XTP PI 100) |
| ZRTP Pro 725M | |
| Device | 24.3 BTU/hr |
| Device and power injector | 34.7 BTU/hr |
| ZRTP Pro 725T | |
| Device | 23.1 BTU/hr |
| Device and power injector | 31.3 BTU/hr |
| ZRTP Pro 1025M | |
| Device | 39.3 BTU/hr |
| Device and power injector | 45.3 BTU/hr |
| ZRTP Pro 1025T | |
| Device | 34.5 BTU/hr |
| Device and power injector | 41.6 BTU/hr |
| Mounting | |
| ZRTP Pro 725M and 1025M | Wall, furniture, or rack |
| ZRTP Pro 725T and 1025T | Set on tabletop |
| Enclosure type | Plastic |
| Enclosure dimensions | |
| ZRTP Pro 725M | 5.05" H x 7.24" W x 1.20" D
(128 mm H x 184 mm W x 30 mm D)
Touchpanel projects 1.01" (26 mm) from the mounting surface |
| |  |
| ZRTP Pro 725T | 4.78" H* x 7.12" W x 3.53" D
(122 mm H* x 181 mm W x 90 mm D) |
| |  |
| ZRTP Pro 1025M | 6.84" H x 10.13" W x 1.26" D
(174 mm H x 257 mm W x 32 mm D)
Touchpanel projects 0.65" (17 mm) from the mounting surface |
| |  |
| ZRTP Pro 1025T | 6.40" H x 10.10" W x 4.15" D
(163 mm H x 257 mm W x 105 mm D) |
| |  |
| Product weight | |
| ZRTP Pro 725M | 1.10 lbs (0.50 kg) |
| ZRTP Pro 725T | 1.75 lbs (0.79 kg) |
| ZRTP Pro 1025M | 2.05 lbs (0.92 kg) |
| ZRTP Pro 1025T | 3.00 lbs (1.36 kg) |
| Regulatory compliance | CE, C-Tick, c-UL,FCC Class B, ICES, RoHS, UL, VCCI, WEEE |
| Product warranty | 3 years parts and labor; touchpanel display and overlay components are covered for 1 year |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (6052-D1) |