Página principal de Productos
HDMI
Escaladores y procesadores de señal HDMI
Extensores HDMI Amplificadores de distribución HDMI Conmutadores HDMI Matrices de conmutación HDMI Módulos HDMI de conectividad AV Cables y adaptadores HDMI Gestión EDID
Serie DTP3 IN2004
DSC 12G‑HD A DSC 3G‑HD A DSC 401 DSC HD-12G A DSC HD‑3G A DVS 605 IN1604 IN1606 IN1608 xi IN1806 IN2004 MGP 641 xi MGP 641 xi 5K RGB‑HDMI 300 A Serie DTP3 IN2004 Serie IN1808

Twitter Copy Link

Imprimir

Profesional

Serie DTP3 IN2004

Conmutador escalador 4K/60 sin salto de cuatro entradas con extensión DTP3

Características principales

Integra fuentes HDMI y de audio en sistemas de presentación
Motor de escalado avanzado Vector™ 4K de Extron
Transiciones de conmutación sin salto seleccionables
Inserción y visualización de imagen de logo
Mezcla de audio, nivel, ducking y control de silenciado integrados
Extensión DTP3 integrada que soporta la transmisión de vídeo, audio, alimentación y control hasta 100 m (330 ft) a través de un cable CAT 6A blindado
Todas las características

Previous Next

Se recomienda encarecidamente el cable XTP DTP 22 de par trenzado blindado de Extron

Galería de imágenes

Visión general interactiva

Escalado Vector 4K

Vídeos destacados

Patrón de ajuste 4:4:4

Selector de DTP

Descripciones para consultores

Calculador de tasas de datos 8K

Casos de éxito

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

La serie DTP3 IN2004 de Extron son compactos escaladores de cuatro entradas que admiten resoluciones de vídeo hasta 4K/60 a 4:4:4 e incorporan tecnología DTP3 de Extron para extender señales de vídeo, audio, alimentación y de control hasta 100 m (330 ft) a través de cable CAT 6A blindado. Integrando las fuentes HDMI y de audio en sistemas de presentación, la serie DTP3 IN2004 dispone de tecnología de escalado Vector™ 4K de Extron diseñada para aplicaciones críticas de procesamiento de vídeo. Todos los modelos entregan conmutación rápida y fiable y proporcionan características como efectos de transición sin salto, inserción de logos, entrada de salida en bucle configurable, embebido/desembebido de audio, mezcla y ducking. Cargada con estas capacidades y más, la serie DTP3 IN2004 es ideal para salas de juntas, salas de conferencias y otros espacios de AV profesional. Cuando no se necesita extensión de la señal, el IN2004 también está disponible.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

Serie DTP3 IN2004

Serie SMB 110

Tarjetas XTP CP Fiber 4K de E/S

DTP CrossPoint 82 4K

DTP DVI 4K 330 Tx

DTP T USW 333

Cable STP20

MVGA M‑M

Kits de emisor IR y blindaje

DTP T DSW 4K 233

DTP2 T 202 FB

DTP3 T 301

Serie DTP3 IN2004

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP3 IN2004 DI/DO

Provide a video scaling presentation switcher that shall support up to four inputs and two simultaneous outputs for processing and switching of HDMI video sources, with additional support for signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and switcher for HDMI video sources and associated digital and analog audio
  1. Video Input Requirements
    1. Provide video input connections
      1. Four (4) HDMI supporting HDMI specifications including 4K/60 Deep Color, data rates up to 18 Gbps, and HD lossless audio formats
      2. One (1) RJ-45 for DTP3 twisted pair
    2. Provide automatic detection of input video parameters
      1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
      2. The user may selectively enable to disable automatic detection for each input
    3. Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
    4. Provide storage and recall of video parameters and picture settings
      1. Automatic memories for each video input
        
        Save video settings and picture adjustments without user intervention
        
        Automatically recall settings when the same video rate is encountered
        
        The user may selectively enable or disable automatic memories
      2. Manual user presets
        
        Save picture adjustments
        
        User presets may be saved and recalled using front panel controls
        
        User presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
      3. Manual input presets
        
        Save video settings and picture adjustments
        
        Input presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
    5. Provide automatic 3:2 and 2:2 pulldown detection
  2. Video Output Requirements
    1. Provide video output connections
      1. One (1) RJ-45 for DTP3 twisted pair
      2. Two (2) HDMI
        
        Output 1B shall be configurable to duplicate main scaler output 1A or as loop-out for any video input
    2. Provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Support custom user-defined output resolutions via EDID management
    4. Provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    5. Provide motion adaptive deinterlacing for signals up to 1080i
    6. Provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    7. Provide internal test patterns for calibration and setup
    8. Support image freeze via Ethernet, RS-232 or USB connection
    9. Support upload and placement of a custom logo graphic at any position on the video output
      1. Support logo placement as a foreground image
      2. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
      3. Shall support displaying full screen images up to 4096x2160 resolution
      4. Shall support up to 16 logo presets
      5. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    10. Support automatic muting of video and sync output when no video input signal is present
      1. Provide a choice to generate a blue screen or a black screen before disabling sync
      2. Provide a configurable timeout period before disabling sync
      3. The user may selectively enable or disable automatic muting of sync output
    11. Provide a low power standby state selectable via Ethernet, RS-232 or USB
    12. Support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    13. Support selection of output color space as RGB or component video
  3. Switching Requirements
    1. Provide configurable automatic switching modes between input sources
      1. Last connected: always switch to the last active connected input
      2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
    2. Provide selectable transition effects when switching inputs
      1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
      2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
      3. Cut through black: video output shall cut to black, then cut to the newly selected input source
      4. Fade through black: video output shall fade to black, then fade into the newly selected input source
      5. Accompanying audio shall ramp down, then ramp up to match the transition effect
  4. EDID Requirements
    1. Provide automatic EDID management between connected devices
      1. Provide a set of pre-stored EDID files
      2. Support capture of EDID from any connected display
      3. Support user uploading of custom-generated EDID files
      4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
  5. HDCP Requirements
    1. The unit shall be HDCP 2.3 compliant
      1. Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
      2. Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
      3. Provide the option to disable HDCP processing at video inputs when passing unencrypted content
      4. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
        
        When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
        
        When enabled, the option shall be provided to display a user-provided image in place of the green video output
        
        When disabled, the output shall be muted
    2. Provide real-time verification of HDCP status for each video input and output
      1. Directly readable on front panel LEDs
      2. Electronically accessible over Ethernet, RS-232 or USB connection
  6. DTP3 Twisted pair requirements
    1. Provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
    2. Support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
    3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
    4. Support computer and video resolutions up to 3840x2160/60 at 4:4:4 chroma sampling
    5. Shall actively buffer DDC channels
    6. Shall be configurable for compatibility with
      1. Extron DTP inputs and outputs
      2. Extron DTP3 inputs and outputs
      3. Extron XTP matrix switcher inputs and outputs
      4. HDBaseT inputs
    7. Provide power to remote DTP or DTP3 endpoint connected over the shielded CAT 6A cable.
  7. Audio Requirements
    1. Provide audio input connections
      1. Two (2) HDMI, embedded
      2. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
      3. One (1) 5-pole 3.5mm captive screw, balanced/unbalanced line level analog stereo
    2. Provide audio output connections
      1. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
      2. Two (2) HDMI, embedded and with output level control for two-channel PCM
      3. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
    3. Support embedding of the analog audio input signal on the HDMI and DTP3 outputs
    4. Support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
    5. Provide digital audio processing tools including gain, mixing, and ducking
    6. Provide the capability of all four video inputs to share a common analog audio input
    7. Provide a delay in the audio output to match the corresponding video processing delay
    8. Provide gain and attenuation adjustments for analog input audio
    9. Support individual muting of the analog stereo or embedded digital audio outputs
    10. Support storage and playback of up to 16 audio files
  8. Control/remote - RS-232 Pass-Through Over Shielded CAT 6A Requirements
    1. Provide connections for AV device control
      1. Support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
    2. Support RS-232 transmission over shielded CAT 6A up to 330 feet (100 meters)
  9. Control/Remote - Switcher Requirements
    1. Provide control connections
      1. One (1) RJ-45: 10/100/1000Base-T Ethernet
      2. One (1) 3-pole 3.5mm captive screw: RS-232
      3. Seven (7) 2-pole 3.5mm captive screw: contact closure/tally
      4. One (1) USB-C: USB 2.0
    2. Provide alternatives for configuration and operation
      1. On-screen menus navigated using front panel controls
      2. Product configuration software connected via Ethernet, USB, or RS-232
      3. Serial commands sent over Ethernet, RS-232 or USB connection
    3. Each tally output shall provide +5 VDC to light an LED indicating the currently selected input
    4. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
    5. Support triggering of standard CEC commands at video outputs
  10. General Requirements
    1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
    2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
      3. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron IN2004 DI/DO (part number 60-1962-03); no alternates or equals

DTP3 IN2004 DI/DO

Provide a video scaling presentation switcher that shall support up to four inputs and two simultaneous outputs for processing and switching of HDMI video sources, with additional support for signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and switcher for HDMI video sources and associated digital and analog audio
  1. Video Input Requirements
    1. Provide video input connections
      1. Four (4) HDMI supporting HDMI specifications including 4K/60 Deep Color, data rates up to 18 Gbps, and HD lossless audio formats
      2. One (1) RJ-45 for DTP3 twisted pair
    2. Provide automatic detection of input video parameters
      1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
      2. The user may selectively enable to disable automatic detection for each input
    3. Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
    4. Provide storage and recall of video parameters and picture settings
      1. Automatic memories for each video input
        
        Save video settings and picture adjustments without user intervention
        
        Automatically recall settings when the same video rate is encountered
        
        The user may selectively enable or disable automatic memories
      2. Manual user presets
        
        Save picture adjustments
        
        User presets may be saved and recalled using front panel controls
        
        User presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
      3. Manual input presets
        
        Save video settings and picture adjustments
        
        Input presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
    5. Provide automatic 3:2 and 2:2 pulldown detection
  2. Video Output Requirements
    1. Provide video output connections
      1. One (1) RJ-45 for DTP3 twisted pair
      2. Two (2) HDMI
        
        Output 1B shall be configurable to duplicate main scaler output 1A or as loop-out for any video input
    2. Provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Support custom user-defined output resolutions via EDID management
    4. Provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    5. Provide motion adaptive deinterlacing for signals up to 1080i
    6. Provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    7. Provide internal test patterns for calibration and setup
    8. Support image freeze via Ethernet, RS-232 or USB connection
    9. Support upload and placement of a custom logo graphic at any position on the video output
      1. Support logo placement as a foreground image
      2. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
      3. Shall support displaying full screen images up to 4096x2160 resolution
      4. Shall support up to 16 logo presets
      5. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    10. Support automatic muting of video and sync output when no video input signal is present
      1. Provide a choice to generate a blue screen or a black screen before disabling sync
      2. Provide a configurable timeout period before disabling sync
      3. The user may selectively enable or disable automatic muting of sync output
    11. Provide a low power standby state selectable via Ethernet, RS-232 or USB
    12. Support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    13. Support selection of output color space as RGB or component video
  3. Switching Requirements
    1. Provide configurable automatic switching modes between input sources
      1. Last connected: always switch to the last active connected input
      2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
    2. Provide selectable transition effects when switching inputs
      1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
      2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
      3. Cut through black: video output shall cut to black, then cut to the newly selected input source
      4. Fade through black: video output shall fade to black, then fade into the newly selected input source
      5. Accompanying audio shall ramp down, then ramp up to match the transition effect
  4. EDID Requirements
    1. Provide automatic EDID management between connected devices
      1. Provide a set of pre-stored EDID files
      2. Support capture of EDID from any connected display
      3. Support user uploading of custom-generated EDID files
      4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
  5. HDCP Requirements
    1. The unit shall be HDCP 2.3 compliant
      1. Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
      2. Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
      3. Provide the option to disable HDCP processing at video inputs when passing unencrypted content
      4. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
        
        When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
        
        When enabled, the option shall be provided to display a user-provided image in place of the green video output
        
        When disabled, the output shall be muted
    2. Provide real-time verification of HDCP status for each video input and output
      1. Directly readable on front panel LEDs
      2. Electronically accessible over Ethernet, RS-232 or USB connection
  6. DTP3 Twisted pair requirements
    1. Provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
    2. Support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
    3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
    4. Support computer and video resolutions up to 3840x2160/60 at 4:4:4 chroma sampling
    5. Shall actively buffer DDC channels
    6. Shall be configurable for compatibility with
      1. Extron DTP inputs and outputs
      2. Extron DTP3 inputs and outputs
      3. Extron XTP matrix switcher inputs and outputs
      4. HDBaseT inputs
    7. Provide power to remote DTP or DTP3 endpoint connected over the shielded CAT 6A cable.
  7. Audio Requirements
    1. Provide audio input connections
      1. Two (2) HDMI, embedded
      2. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
      3. One (1) 5-pole 3.5mm captive screw, balanced/unbalanced line level analog stereo
    2. Provide audio output connections
      1. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
      2. Two (2) HDMI, embedded and with output level control for two-channel PCM
      3. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
    3. Support embedding of the analog audio input signal on the HDMI and DTP3 outputs
    4. Support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
    5. Provide digital audio processing tools including gain, mixing, and ducking
    6. Provide the capability of all four video inputs to share a common analog audio input
    7. Provide a delay in the audio output to match the corresponding video processing delay
    8. Provide gain and attenuation adjustments for analog input audio
    9. Support individual muting of the analog stereo or embedded digital audio outputs
    10. Support storage and playback of up to 16 audio files
  8. Control/remote - RS-232 Pass-Through Over Shielded CAT 6A Requirements
    1. Provide connections for AV device control
      1. Support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
    2. Support RS-232 transmission over shielded CAT 6A up to 330 feet (100 meters)
  9. Control/Remote - Switcher Requirements
    1. Provide control connections
      1. One (1) RJ-45: 10/100/1000Base-T Ethernet
      2. One (1) 3-pole 3.5mm captive screw: RS-232
      3. Seven (7) 2-pole 3.5mm captive screw: contact closure/tally
      4. One (1) USB-C: USB 2.0
    2. Provide alternatives for configuration and operation
      1. On-screen menus navigated using front panel controls
      2. Product configuration software connected via Ethernet, USB, or RS-232
      3. Serial commands sent over Ethernet, RS-232 or USB connection
    3. Each tally output shall provide +5 VDC to light an LED indicating the currently selected input
    4. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
    5. Support triggering of standard CEC commands at video outputs
  10. General Requirements
    1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
    2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
      3. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron IN2004 DI/DO (part number 60-1962-03); no alternates or equals

DTP3 IN2004 DO

Provide a video scaling presentation switcher that shall support up to four inputs and two simultaneous outputs for processing and switching of HDMI video sources, with additional support for signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and switcher for HDMI video sources and associated digital and analog audio
  1. Video Input Requirements
    1. Provide video input connections
      1. Four (4) HDMI supporting HDMI specifications including 4K/60 Deep Color, data rates up to 18 Gbps, and HD lossless audio formats
    2. Provide automatic detection of input video parameters
      1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
      2. The user may selectively enable to disable automatic detection for each input
    3. Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
    4. Provide storage and recall of video parameters and picture settings
      1. Automatic memories for each video input
        
        Save video settings and picture adjustments without user intervention
        
        Automatically recall settings when the same video rate is encountered
        
        The user may selectively enable or disable automatic memories
      2. Manual user presets
        
        Save picture adjustments
        
        User presets may be saved and recalled using front panel controls
        
        User presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
      3. Manual input presets
        
        Save video settings and picture adjustments
        
        Input presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
    5. Provide automatic 3:2 and 2:2 pulldown detection
  2. Video Output Requirements
    1. Provide video output connections
      1. One (1) RJ-45 for DTP3 twisted pair
      2. Two (2) HDMI
        
        Output 1B shall be configurable to duplicate main scaler output 1A or as loop-out for any video input
    2. Provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Support custom user-defined output resolutions via EDID management
    4. Provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    5. Provide motion adaptive deinterlacing for signals up to 1080i
    6. Provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    7. Provide internal test patterns for calibration and setup
    8. Support image freeze via Ethernet, RS-232 or USB connection
    9. Support upload and placement of a custom logo graphic at any position on the video output
      1. Support logo placement as a foreground image
      2. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
      3. Shall support displaying full screen images up to 4096x2160 resolution
      4. Shall support up to 16 logo presets
      5. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    10. Support automatic muting of video and sync output when no video input signal is present
      1. Provide a choice to generate a blue screen or a black screen before disabling sync
      2. Provide a configurable timeout period before disabling sync
      3. The user may selectively enable or disable automatic muting of sync output
    11. Provide a low power standby state selectable via Ethernet, RS-232 or USB
    12. Support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    13. Support selection of output color space as RGB or component video
  3. Switching Requirements
    1. Provide configurable automatic switching modes between input sources
      1. Last connected: always switch to the last active connected input
      2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
    2. Provide selectable transition effects when switching inputs
      1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
      2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
      3. Cut through black: video output shall cut to black, then cut to the newly selected input source
      4. Fade through black: video output shall fade to black, then fade into the newly selected input source
      5. Accompanying audio shall ramp down, then ramp up to match the transition effect
  4. EDID Requirements
    1. Provide automatic EDID management between connected devices
      1. Provide a set of pre-stored EDID files
      2. Support capture of EDID from any connected display
      3. Support user uploading of custom-generated EDID files
      4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
  5. HDCP Requirements
    1. The unit shall be HDCP 2.3 compliant
      1. Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
      2. Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
      3. Provide the option to disable HDCP processing at video inputs when passing unencrypted content
      4. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
        
        When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
        
        When enabled, the option shall be provided to display a user-provided image in place of the green video output
        
        When disabled, the output shall be muted
    2. Provide real-time verification of HDCP status for each video input and output
      1. Directly readable on front panel LEDs
      2. Electronically accessible over Ethernet, RS-232 or USB connection
  6. DTP3 Twisted pair requirements
    1. Provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
    2. Support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
    3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
    4. Support computer and video resolutions up to 3840x2160/60 at 4:4:4 chroma sampling
    5. Support stereo audio pass-through signals
    6. Shall actively buffer DDC channels
    7. Shall be configurable for compatibility with
      1. Extron DTP inputs
      2. Extron DTP3 inputs
      3. Extron XTP matrix switcher inputs
      4. HDBaseT inputs
    8. Provide power to remote DTP or DTP3 receiver connected over the shielded CAT 6A cable.
  7. Audio Requirements
    1. Provide audio input connections
      1. Four (4) HDMI, embedded
      2. One (1) 5-pole 3.5mm captive screw, balanced/unbalanced line level analog stereo
    2. Provide audio output connections
      1. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
      2. Two (2) HDMI, embedded and with output level control for two-channel PCM
      3. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
    3. Support embedding of the analog audio input signal on the HDMI and DTP3 outputs
    4. Support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
    5. Provide digital audio processing tools including gain, mixing, and ducking
    6. Provide the capability of all four video inputs to share a common analog audio input
    7. Provide a delay in the audio output to match the corresponding video processing delay
    8. Provide gain and attenuation adjustments for analog input audio
    9. Support individual muting of the analog stereo or embedded digital audio outputs
    10. Support storage and playback of up to 16 audio files
  8. Control/remote - RS-232 Pass-Through Over Shielded CAT 6A Requirements
    1. Provide connections for AV device control
      1. Support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
    2. Support RS-232 transmission over shielded CAT 6A up to 330 feet (100 meters)
  9. Control/Remote - Switcher Requirements
    1. Provide control connections
      1. One (1) RJ-45: 10/100/1000Base-T Ethernet
      2. One (1) 3-pole 3.5mm captive screw: RS-232
      3. Seven (7) 2-pole 3.5mm captive screw: contact closure/tally
      4. One (1) USB-C: USB 2.0
    2. Provide alternatives for configuration and operation
      1. On-screen menus navigated using front panel controls
      2. Product configuration software connected via Ethernet, USB, or RS-232
      3. Serial commands sent over Ethernet, RS-232 or USB connection
    3. Each tally output shall provide +5 VDC to light an LED indicating the currently selected input
    4. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
    5. Support triggering of standard CEC commands at video outputs
  10. General Requirements
    1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
    2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
      3. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron IN2004 DO (part number 60-1962-02); no alternates or equals

DTP3 IN2004 DO

Provide a video scaling presentation switcher that shall support up to four inputs and two simultaneous outputs for processing and switching of HDMI video sources, with additional support for signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and switcher for HDMI video sources and associated digital and analog audio
  1. Video Input Requirements
    1. Provide video input connections
      1. Four (4) HDMI supporting HDMI specifications including 4K/60 Deep Color, data rates up to 18 Gbps, and HD lossless audio formats
    2. Provide automatic detection of input video parameters
      1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
      2. The user may selectively enable to disable automatic detection for each input
    3. Provide image adjustments for brightness, contrast, color, tint, detail, H/V positioning, and sizing
    4. Provide storage and recall of video parameters and picture settings
      1. Automatic memories for each video input
        
        Save video settings and picture adjustments without user intervention
        
        Automatically recall settings when the same video rate is encountered
        
        The user may selectively enable or disable automatic memories
      2. Manual user presets
        
        Save picture adjustments
        
        User presets may be saved and recalled using front panel controls
        
        User presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
      3. Manual input presets
        
        Save video settings and picture adjustments
        
        Input presets may be saved and recalled electronically via Ethernet, RS-232 or USB connection
    5. Provide automatic 3:2 and 2:2 pulldown detection
  2. Video Output Requirements
    1. Provide video output connections
      1. One (1) RJ-45 for DTP3 twisted pair
      2. Two (2) HDMI
        
        Output 1B shall be configurable to duplicate main scaler output 1A or as loop-out for any video input
    2. Provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Support custom user-defined output resolutions via EDID management
    4. Provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    5. Provide motion adaptive deinterlacing for signals up to 1080i
    6. Provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    7. Provide internal test patterns for calibration and setup
    8. Support image freeze via Ethernet, RS-232 or USB connection
    9. Support upload and placement of a custom logo graphic at any position on the video output
      1. Support logo placement as a foreground image
      2. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
      3. Shall support displaying full screen images up to 4096x2160 resolution
      4. Shall support up to 16 logo presets
      5. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    10. Support automatic muting of video and sync output when no video input signal is present
      1. Provide a choice to generate a blue screen or a black screen before disabling sync
      2. Provide a configurable timeout period before disabling sync
      3. The user may selectively enable or disable automatic muting of sync output
    11. Provide a low power standby state selectable via Ethernet, RS-232 or USB
    12. Support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    13. Support selection of output color space as RGB or component video
  3. Switching Requirements
    1. Provide configurable automatic switching modes between input sources
      1. Last connected: always switch to the last active connected input
      2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
    2. Provide selectable transition effects when switching inputs
      1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
      2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
      3. Cut through black: video output shall cut to black, then cut to the newly selected input source
      4. Fade through black: video output shall fade to black, then fade into the newly selected input source
      5. Accompanying audio shall ramp down, then ramp up to match the transition effect
  4. EDID Requirements
    1. Provide automatic EDID management between connected devices
      1. Provide a set of pre-stored EDID files
      2. Support capture of EDID from any connected display
      3. Support user uploading of custom-generated EDID files
      4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
  5. HDCP Requirements
    1. The unit shall be HDCP 2.3 compliant
      1. Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
      2. Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
      3. Provide the option to disable HDCP processing at video inputs when passing unencrypted content
      4. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
        
        When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
        
        When enabled, the option shall be provided to display a user-provided image in place of the green video output
        
        When disabled, the output shall be muted
    2. Provide real-time verification of HDCP status for each video input and output
      1. Directly readable on front panel LEDs
      2. Electronically accessible over Ethernet, RS-232 or USB connection
  6. DTP3 Twisted pair requirements
    1. Provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
    2. Support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
    3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
    4. Support computer and video resolutions up to 3840x2160/60 at 4:4:4 chroma sampling
    5. Support stereo audio pass-through signals
    6. Shall actively buffer DDC channels
    7. Shall be configurable for compatibility with
      1. Extron DTP inputs
      2. Extron DTP3 inputs
      3. Extron XTP matrix switcher inputs
      4. HDBaseT inputs
    8. Provide power to remote DTP or DTP3 receiver connected over the shielded CAT 6A cable.
  7. Audio Requirements
    1. Provide audio input connections
      1. Four (4) HDMI, embedded
      2. One (1) 5-pole 3.5mm captive screw, balanced/unbalanced line level analog stereo
    2. Provide audio output connections
      1. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
      2. Two (2) HDMI, embedded and with output level control for two-channel PCM
      3. One RJ-45 for DTP3 twisted pair transmitting embedded digital audio
    3. Support embedding of the analog audio input signal on the HDMI and DTP3 outputs
    4. Support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
    5. Provide digital audio processing tools including gain, mixing, and ducking
    6. Provide the capability of all four video inputs to share a common analog audio input
    7. Provide a delay in the audio output to match the corresponding video processing delay
    8. Provide gain and attenuation adjustments for analog input audio
    9. Support individual muting of the analog stereo or embedded digital audio outputs
    10. Support storage and playback of up to 16 audio files
  8. Control/remote - RS-232 Pass-Through Over Shielded CAT 6A Requirements
    1. Provide connections for AV device control
      1. Support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
    2. Support RS-232 transmission over shielded CAT 6A up to 330 feet (100 meters)
  9. Control/Remote - Switcher Requirements
    1. Provide control connections
      1. One (1) RJ-45: 10/100/1000Base-T Ethernet
      2. One (1) 3-pole 3.5mm captive screw: RS-232
      3. Seven (7) 2-pole 3.5mm captive screw: contact closure/tally
      4. One (1) USB-C: USB 2.0
    2. Provide alternatives for configuration and operation
      1. On-screen menus navigated using front panel controls
      2. Product configuration software connected via Ethernet, USB, or RS-232
      3. Serial commands sent over Ethernet, RS-232 or USB connection
    3. Each tally output shall provide +5 VDC to light an LED indicating the currently selected input
    4. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
    5. Support triggering of standard CEC commands at video outputs
  10. General Requirements
    1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
    2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
    3. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, c-UL, and UL
      2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
      3. Shall comply with appropriate requirements of RoHS and WEEE
    4. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron IN2004 DO (part number 60-1962-02); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

Serie DTP3 IN2004 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

Serie DTP3 IN2004

Conmutador escalador 4K/60 sin salto de cuatro entradas con extensión DTP3

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.