Página principal de Productos
Matrices de conmutación
SDI/HD-SDI
Fibra óptica Matrices de conmutacion DTP Matrices de conmutación XTP Modulares y ampliables Par trenzado HDMI DVI Ultra banda ancha RGB VGA y audio estéreo Matrices de conmutación AV Presentación multimedia Productos de escalado Vídeo compuesto S-Video HDTV/componentes Audio Accesorios para matrices de conmutación Teclados y paneles de control Mandos a distancia IR Accesorios para FOX Matrix 14400 y FOX Matrix 320x
FOX 3G I/O SM P
FOX 3G I/O SM P FOX I/O 1616 HD-SDI FOX I/O 88 HD-SDI FOX Matrix 3200 FOX Matrix 7200 Serie SMX SDI multitasa SMX System MultiMatrix

Imprimir

Profesional

FOX 3G I/O SM P

Tarjeta 3G-SDI de E/S de fibra óptica para la serie FOX Matrix

Características principales

Tarjeta 3G-SDI de E/S de fibra óptica para la serie FOX Matrix
Se adapta automáticamente a los estándares de vídeo digital ITU y SMPTE para 3G-SDI, HD-SDI y SDI
Fácil integración en una amplia variedad de entornos 4K
Inmunidad a los patrones de señal patológicos
Transmite audio embebido, ID auxiliar e información de metadatos y señales de vídeo digital SD/HD-SDTI
Intercambiable en caliente
Ver todas las características

Previous Next

Galería de imágenes

Visión global interactiva

Vídeos destacados

Descripciones para consultores

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

La tarjeta FOX 3G I/O SM P de Extron está disponible como opción para las matrices de conmutación de fibra óptica modulares de la serie FOX Matrix, y permite la transmisión y distribución de señales de fibra óptica 3G-SDI, incluyendo señales patológicas, a través de cableado monomodo de fibra óptica. La tarjeta ofrece una configuración de 8x8 o 16x16 para la conmutación y distribución de señales hasta 2,97 Gbps, incluyendo SDI, HD-SDI y 3G-SDI. Con esta tarjeta, una matriz FOX Matrix puede configurarse como una matriz de conmutación 3G-SDI dedicada, o como una combinación de matrices de conmutación 3G-SDI y de fibra óptica. La tarjeta FOX 3G I/O SM P puede pasar señales patológicas, incluyendo las definidas por RP 178 y RP 198, y es compatible con los estándares de vídeo digital SMPTE 297-2006, 259M, 292M, 424M e ITU.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

FOX 3G I/O SM P

Descripciones para consultores

Seleccione un número de referencia:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

FOX 3G I/O 1616 SM P

Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 14400 matrix switcher that shall support the switching and distribution of 3G-SDI, HD-SDI, and SDI signals over singlemode fiber optic cable
1. Single slot I/O board designed for use with the Extron FOX Matrix 14400 matrix switcher
2. Input and output requirements
  1. Shall provide thirty-two (32) LC-type fiber optic connectors for fiber optic signals
    1. Sixteen (16) input connectors per board
    2. Sixteen (16) output connectors per board
  2. Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
  3. Shall provide reclocking on fiber optic outputs
  4. Shall support data rates from 270 Mbps to 2.97 Gbps
  5. Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
  6. Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
  7. Shall provide status LED indicators for signal presence on each port
  8. Shall support remote device connections via fiber optic transmitters and receivers
  9. Shall be compatible with the Extron FOX 3G HD-SDI P SM fiber optic extender
  10. Shall be compatible with the Extron FOX 3G HD SDI SM fiber optic extender
  11. Shall be compatible with the Extron PowerCage FOX 3G HD-SDI SM fiber optic extender
3. Signal switching requirements
  1. Shall support all-digital switching 3G-SDI, HD-SDI, and SDI
  2. Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel fiber optic 3G-SDI connections
4. Transmission requirements
  1. Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
  2. Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX Series SM device
5. General requirements
  1. Shall be installed in a FOX Matrix 14400 enclosure
  2. Shall receive power from the backplane when installed in a FOX Matrix 14400 enclosure
  3. Shall be configured and controlled via the FOX Matrix 14400 enclosure
  4. Shall be hot-swappable
  5. Shall be compatible with FOX Matrix 14400 matrix switcher
6. Approved device shall be the Extron FOX 3G I/O 1616 SM P (70-965-01); no alternates or equals

FOX 3G I/O 1616 SM P

Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 14400 matrix switcher that shall support the switching and distribution of 3G-SDI, HD-SDI, and SDI signals over singlemode fiber optic cable
1. Single slot I/O board designed for use with the Extron FOX Matrix 14400 matrix switcher
2. Input and output requirements
  1. Shall provide thirty-two (32) LC-type fiber optic connectors for fiber optic signals
    1. Sixteen (16) input connectors per board
    2. Sixteen (16) output connectors per board
  2. Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
  3. Shall provide reclocking on fiber optic outputs
  4. Shall support data rates from 270 Mbps to 2.97 Gbps
  5. Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
  6. Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
  7. Shall provide status LED indicators for signal presence on each port
  8. Shall support remote device connections via fiber optic transmitters and receivers
  9. Shall be compatible with the Extron FOX 3G HD-SDI P SM fiber optic extender
  10. Shall be compatible with the Extron FOX 3G HD SDI SM fiber optic extender
  11. Shall be compatible with the Extron PowerCage FOX 3G HD-SDI SM fiber optic extender
3. Signal switching requirements
  1. Shall support all-digital switching 3G-SDI, HD-SDI, and SDI
  2. Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel fiber optic 3G-SDI connections
4. Transmission requirements
  1. Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
  2. Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX Series SM device
5. General requirements
  1. Shall be installed in a FOX Matrix 14400 enclosure
  2. Shall receive power from the backplane when installed in a FOX Matrix 14400 enclosure
  3. Shall be configured and controlled via the FOX Matrix 14400 enclosure
  4. Shall be hot-swappable
  5. Shall be compatible with FOX Matrix 14400 matrix switcher
6. Approved device shall be the Extron FOX 3G I/O 1616 SM P (70-965-01); no alternates or equals

FOX 3G I/O 88 SM P

Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of 3G-SDI, HD-SDI, and SDI signals over singlemode fiber optic cable
1. Single slot I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
2. Input and output requirements
  1. Shall provide sixteen (16) LC-type fiber optic connectors for fiber optic signals
    1. Eight (8) input connectors per board
    2. Eight (8) output connectors per board
  2. Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
  3. Shall provide reclocking on fiber optic outputs
  4. Shall support data rates from 270 Mbps to 2.97 Gbps
  5. Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
  6. Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
  7. Shall provide status LED indicators for signal presence on each port
  8. Shall support remote device connections via fiber optic transmitters and receivers
  9. Shall be compatible with the Extron FOX 3G HD-SDI P SM fiber optic extender
  10. Shall be compatible with the Extron FOX 3G HD SDI SM fiber optic extender
  11. Shall be compatible with the Extron PowerCage FOX 3G HD-SDI SM fiber optic extender
3. Signal switching requirements
  1. Shall support all-digital switching 3G-SDI, HD-SDI, and SDI
  2. Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel fiber optic 3G-SDI connections
4. Transmission requirements
  1. Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
  2. Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX Series SM device
5. General requirements
  1. Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
  2. Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
  3. Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
  4. Shall be hot-swappable
  5. Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
6. Approved device shall be the Extron FOX 3G I/O 88 SM P (70-965-02); no alternates or equals

FOX 3G I/O 88 SM P

Shall provide a singlemode fiber optic I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers that shall support the switching and distribution of 3G-SDI, HD-SDI, and SDI signals over singlemode fiber optic cable
1. Single slot I/O board designed for use with the Extron FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
2. Input and output requirements
  1. Shall provide sixteen (16) LC-type fiber optic connectors for fiber optic signals
    1. Eight (8) input connectors per board
    2. Eight (8) output connectors per board
  2. Shall automatically adapt to SMPTE and ITU digital video standards for 3G-SDI, HD-SDI, and SDI
  3. Shall provide reclocking on fiber optic outputs
  4. Shall support data rates from 270 Mbps to 2.97 Gbps
  5. Shall pass embedded audio, ancillary ID, metadata information, and SD/HD-SDTI digital video signals
  6. Shall be immune to pathological signal patterns including those defined by SMPTE RP 178 and SMPTE RP 198 for 3G-SDI, HD-SDI, and SDI
  7. Shall provide status LED indicators for signal presence on each port
  8. Shall support remote device connections via fiber optic transmitters and receivers
  9. Shall be compatible with the Extron FOX 3G HD-SDI P SM fiber optic extender
  10. Shall be compatible with the Extron FOX 3G HD SDI SM fiber optic extender
  11. Shall be compatible with the Extron PowerCage FOX 3G HD-SDI SM fiber optic extender
3. Signal switching requirements
  1. Shall support all-digital switching 3G-SDI, HD-SDI, and SDI
  2. Shall support computer and video resolutions up to 4096x2160 at 60 Hz with 4:2:2 chroma sampling and 10 bits color bit depth using four (4) parallel fiber optic 3G-SDI connections
4. Transmission requirements
  1. Shall support a maximum signal transmission distance up to 30 km (18.75 miles) over singlemode fiber optic cable at 1310 nm
  2. Shall provide an optical loss budget of 13 dB between each board I/O and a connected FOX Series SM device
5. General requirements
  1. Shall be installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
  2. Shall receive power from the backplane when installed in a FOX Matrix 3200 or FOX Matrix 7200 enclosure
  3. Shall be configured and controlled via the FOX Matrix 3200 or FOX Matrix 7200 enclosure
  4. Shall be hot-swappable
  5. Shall be compatible with FOX Matrix 3200 and FOX Matrix 7200 matrix switchers
6. Approved device shall be the Extron FOX 3G I/O 88 SM P (70-965-02); no alternates or equals

Añadir un elemento al carro

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro