Página principal de Productos
AV sobre IP - Sistemas NAV
NAV de AV Pro sobre IP
Codificadores Decodificadores Gestor de sistemas Switches validados P+F
NAV 10E 501
NAV 10E 101 NAV 10E 201 D NAV 10E 401 D NAV 10E 501 NAV E 101 NAV E 111 DTP3 NAV E 121 NAV E 201 D NAV E 222 NAV E 401 D NAV E 501 NAV E 511

Twitter Copy Link

Imprimir

Profesional

NAV 10E 501

Codificador de AV profesional sobre IP 10G - HDMI, Ethernet y USB

Características principales

Codifica y realiza streaming de señales de vídeo 4K/60 a 4:4:4, audio, Ethernet y USB a través de Ethernet óptica de 10 Gbps
Códec PURE3^® que entrega una resiliencia de red mejorada
Intelligent Selective Streaming de PURE3 reduce los requisitos de ancho de banda
Entrada HDMI y de paso con HDCP 2.3 a resoluciones de hasta 4K/60 a 4:4:4
Capacidades AES67 ampliadas
Estación de trabajo KVM de NAV
Todas las características

Previous Next

Galería de imágenes

Visión general interactiva

Vídeos destacados

Premios

Reader’s Choice 2025 de AVNation - Best AV over IP Technology y Signal Distribution
Premio Best in Market, Pro AV 2025 de Sound & Video Contractor
Premio Readers' Choice 2025 de rAVe - Favorite AV-over-IP Brand
2024 Best AV-over-IP Technology: Best in Class
Premio INAVATION AWARDS 2024 - Best Signal Distribution & Processing Technology
Premio Mejor tecnología AV sobre IP y distribución de la señal AV en los AVNation Readers' Choice Award 2023
Premios AVNation Reader's Choice Awards 2021

Comparar características

Descripciones para consultores

Casos de éxito

Switches validados

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El NAV 10E 501 es un codificador de AV profesional sobre IP que envía por streaming señales de vídeo de alta calidad, audio, Ethernet y USB 2.0 con latencia ultrabaja a través de redes Ethernet de 10 Gbps a tasas de bits bajas. Utiliza el códec PURE3^® patentado por Extron y proporciona un rendimiento revolucionario, ofreciendo vídeo en tiempo real sin pérdidas visuales a resoluciones de hasta 4K a 60 Hz con muestreo de croma 4:4:4 y latencia ultrabaja. Los ajustes de la tasa de bits regulables permiten la compatibilidad con puntos de destino NAV^® de 1 Gbps, aumentando así la escalabilidad para grandes sistemas. El soporte a audio AES67 sobre IP facilita la integración flexible con los DSP DMP Plus u otros componentes de audio sobre IP. Nuestra plataforma NAV es potente y altamente escalable, ha sido creada con la finalidad específica de dar soporte a aplicaciones de AV profesional exigentes, y permite una transferencia segura de señales AV a miles de puntos de destino.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

NAV 10E 501

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

NAV 10E 501 (multimode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over multimode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network (external Ethernet switch performs electrical/optical physical layer conversion)
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gbit decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-04; no alternates or equals)

NAV 10E 501 (multimode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over multimode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network (external Ethernet switch performs electrical/optical physical layer conversion)
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gbit decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-04; no alternates or equals)

NAV 10E 501 (singlemode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over singlemode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gb decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-05; no alternates or equals)

NAV 10E 501 (singlemode)

Provide a Pro AV over IP encoder that streams ultra-low latency, high quality audio, video, Ethernet, and USB 2.0 signals over 10 Gbit fiber optic Ethernet networks
1. Encode audio, video, Ethernet, and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 2-pole captive screw connector for Contact closure and Tally output
  5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  6. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  7. LC connector shall also support Ethernet extension for remote LAN connectivity over singlemode fiber optic cable
  8. Provide one 2-pole captive screw connector for 12VDC power
  9. Provide twelve LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio input status
    5. Analog audio LED on front panel to indicate analog audio input status
    6. Stream LED on front panel to indicate streaming status
    7. Two LAN LEDs on front panel to indicate network link/activity status
    8. Two LAN LEDs on back panel to indicate network link/activity status
    9. ID LED on front panel for visual confirmation of units on the network
    10. Reset LED on back panel to indicate reset status
  10. Provide an ID button on the front panel to identify the unit on the network
  11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 extension with speed up to 480 Mbps
  13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
  14. Support audio streaming between encoder and decoder
  15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
  16. Maintain continuous HDCP-encryption between the source and encoder
  17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x2160), and 4K (4096 x 2160) @ 60 Hz
  20. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  21. Support HDMI embedded and analog stereo audio
  22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  25. Support a low delay, encode and decode process
  26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  27. Support IGMPv3multicast per RFC 3376
  28. Support RTP transport type per RFC 1889
  29. Support 802.1x port-based Network Access Control (PNAC)
  30. Support audio and USB breakaway
  31. Support Audio only streaming with a blackburst signal
  32. Support AES67 audio streaming
  33. Support VLAN tagging
  34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  35. Support SRTP encryption of AV and data stream
  36. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  37. Support creation of user defined device names
  38. Support configuration and control from an embedded web browser
  39. Support optional on-screen messaging for device identification.
  40. Support matrix switching between multiple encoders or decoders
  41. Support transmission of lower bitrate video to 1 Gb decoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  42. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  43. Support encoding and decoding audio and video at bit rates adjustable from 150 Mbps to 8.5 Gbps
  44. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  45. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
3. Approved device shall be the Extron NAV 10E 501 (60-1572-05; no alternates or equals)

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

NAV 10E 501 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

NAV 10E 501

Codificador de AV profesional sobre IP 10G - HDMI, Ethernet y USB

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.