Página principal de Productos
Controladores MediaLink Plus
Accesorios MediaLink Plus
MLC Plus 50 Serie MLC Plus 84 Serie MLC Plus 100 Serie MLC Plus 200 Serie MLC 55 Serie MLC 60 Serie MLC 226 IP Accesorios para los controladores MediaLink Software Utilidades Apps Drivers de dispositivos Firmware
OCS 100
ECM S10 Kits de emisor IR y blindaje MLM 100 AAP MLM 100 D MLM 200 AAP MLM 200 D MLM 84 Flex55 OCS 100

Imprimir

Profesional

OCS 100

Sensores de ocupación

Características principales

Sensores con dos tecnologías: US – Ultrasónica y PIR – Infrarrojos pasivos que proporcionan un área de cobertura amplia con una excelente capacidad de detección
Software inteligente y adaptativo que ajusta de forma automática y continua la sensibilidad y configuración del temporizador, proporcionando una detección fiable y duradera y un funcionamiento sin mantenimiento
Memoria no volátil para los ajustes del sensor
Mando de sensibilidad de los infrarrojos que ayuda a minimizar falsas activaciones
Temporizador ajustable que ahorra energía
LED de estado que se iluminan cuando se detecta ocupación
Todas las características

Previous Next

Galería de imágenes

Descripciones para consultores

Casos de éxito

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El OCS 100C y el OCS 100W de Extron son sensores de ocupación de montaje en techo y pared que proporcionan una cobertura excepcional utilizando tecnologías de detección ultrasónica e infrarrojos pasivos. Su software integrado es inteligente y adaptativo, permite supervisar de forma automática y continua el entorno, además de ajustar la sensibilidad y configuración del temporizador, proporcionando una detección fiable y duradera y un funcionamiento sin mantenimiento. Estos sensores de ocupación han sido probados para su uso en todo el mundo y son ideales en cualquier aplicación de negocios donde se necesite una gestión racional de la energía o distintos escenarios de automatización según la ocupación.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

OCS 100

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

OCS 100C

Provide a ceiling-mount occupancy sensor designed with switching and control of AV equipment in mind.
1. Device shall allow for room automation when paired with devices equipped with a digital input.
  1. Device shall support the following technologies, allowing for both a wide coverage area and excellent detection capabilities:
    1. US - Ultrasonic
    2. PIR - Passive Infrared
  2. Device shall feature smart and adaptive software that automatically and continuously adjusts timer and sensitivity settings, allowing for a lifetime of maintenance-free operation.
  3. Device shall feature non-volatile memory for sensor settings.
  4. Device shall have a coverage area of 2,000 square feet.
  5. Device shall feature two green LED status indicators located on the surface of the sensor that flash when the Ultrasonic sensors detect occupancy.
  6. Device shall feature two red LED status indicators located below the infrared lens that flash when the infrared sensor detects occupancy.
  7. Device shall feature a retainer ring that holds an optional IR mask in place
  8. Device shall feature four color coded adjustment knobs located under the infrared lens that allows for the following adjustments:
    1. Red – Infrared sensitivity adjustment
    2. Black – Timer Test Dial
    3. Green – Ultrasonic range adjustment
    4. Blue – Photocell sensitivity adjustment
  9. Device shall feature two banks of DIP switches located under the infrared lens that allow for the following adjustments:
    1. Threshold (High / Low Sensitivity)
    2. LED indicators (Enabled / Disabled)
    3. Automatic adjust reset (Toggle)
    4. Strong airflow compensator (Enabled / Disabled)
    5. Over doorway mount (Enabled / Disabled)
    6. Timer adjust (Automatic / Manual)
    7. Sensitivity adjust (Automatic / Manual)
  10. Device shall include a 12VDC to 24VDC power converter allowing for use of a common power supply to be shared with the control processor
  11. Device shall include the following accessories:
    1. Mounting Plate
    2. Mounting Post
    3. Mounting Washer
    4. Mounting Nut
    5. Mounting Screws
    6. Mounting Fender Washers
    7. Mounting Machine Nuts
    8. Conference Room IR Mask
    9. 180° IR Mask
    10. Full IR Mask
    11. 7 Wire Nuts
2. Shall meet regulatory compliances
  1. UL
  2. c-UL
  3. FCC Class A
  4. California Title 24
3. Product Warranty
  1. Shall provide at least 3 years parts and labor
4. Approved device shall be the Extron OCS 100C, part number 60-1664-01; no alternates or equals

OCS 100C

Provide a ceiling-mount occupancy sensor designed with switching and control of AV equipment in mind.
1. Device shall allow for room automation when paired with devices equipped with a digital input.
  1. Device shall support the following technologies, allowing for both a wide coverage area and excellent detection capabilities:
    1. US - Ultrasonic
    2. PIR - Passive Infrared
  2. Device shall feature smart and adaptive software that automatically and continuously adjusts timer and sensitivity settings, allowing for a lifetime of maintenance-free operation.
  3. Device shall feature non-volatile memory for sensor settings.
  4. Device shall have a coverage area of 2,000 square feet.
  5. Device shall feature two green LED status indicators located on the surface of the sensor that flash when the Ultrasonic sensors detect occupancy.
  6. Device shall feature two red LED status indicators located below the infrared lens that flash when the infrared sensor detects occupancy.
  7. Device shall feature a retainer ring that holds an optional IR mask in place
  8. Device shall feature four color coded adjustment knobs located under the infrared lens that allows for the following adjustments:
    1. Red – Infrared sensitivity adjustment
    2. Black – Timer Test Dial
    3. Green – Ultrasonic range adjustment
    4. Blue – Photocell sensitivity adjustment
  9. Device shall feature two banks of DIP switches located under the infrared lens that allow for the following adjustments:
    1. Threshold (High / Low Sensitivity)
    2. LED indicators (Enabled / Disabled)
    3. Automatic adjust reset (Toggle)
    4. Strong airflow compensator (Enabled / Disabled)
    5. Over doorway mount (Enabled / Disabled)
    6. Timer adjust (Automatic / Manual)
    7. Sensitivity adjust (Automatic / Manual)
  10. Device shall include a 12VDC to 24VDC power converter allowing for use of a common power supply to be shared with the control processor
  11. Device shall include the following accessories:
    1. Mounting Plate
    2. Mounting Post
    3. Mounting Washer
    4. Mounting Nut
    5. Mounting Screws
    6. Mounting Fender Washers
    7. Mounting Machine Nuts
    8. Conference Room IR Mask
    9. 180° IR Mask
    10. Full IR Mask
    11. 7 Wire Nuts
2. Shall meet regulatory compliances
  1. UL
  2. c-UL
  3. FCC Class A
  4. California Title 24
3. Product Warranty
  1. Shall provide at least 3 years parts and labor
4. Approved device shall be the Extron OCS 100C, part number 60-1664-01; no alternates or equals

OCS 100W

Provide a wall-mount occupancy sensor designed with switching and control of AV equipment in mind.
1. Device shall allow for room automation when paired with devices equipped with a digital input.
  1. Device shall support the following technologies, allowing for both a wide coverage area and excellent detection capabilities:
    1. US - Ultrasonic
    2. PIR - Passive Infrared
  2. Device shall feature smart and adaptive software that automatically and continuously adjusts timer and sensitivity settings, allowing for a lifetime of maintenance-free operation.
  3. Device shall feature non-volatile memory for sensor settings.
  4. Device shall have a coverage area of 1,600 square feet.
  5. Device shall feature one green LED status indicator located on the top of the sensor that flashes when the Ultrasonic sensors detect occupancy.
  6. Device shall feature one red LED status indicator located on the bottom of the sensor that flashes when the infrared sensor detects occupancy.
  7. Device shall feature three color coded adjustment knobs located under a removable front cover that allows for the following adjustments:
    1. Red – Infrared sensitivity adjustment
    2. Green – Ultrasonic range adjustment
    3. Blue – Photocell sensitivity adjustment
  8. Device shall feature a blue button located under a removable front cover that allows for testing of the timer feature.
  9. Device shall feature two banks of DIP switches located under a removable front cover that allow for the following adjustments:
    1. LED indicators (Enabled / Disabled)
    2. Automatic adjust reset (Toggle)
    3. Timer setting (Pre-determined time interval)
    4. Timer adjust (Automatic / Manual)
    5. Sensitivity adjust (Automatic / Manual)
  10. Device shall include a 12VDC to 24VDC power converter allowing for use of a common power supply to be shared with the control processor
  11. Device shall include the following accessories:
    1. Mounting Plate
    2. Swiveling Post
    3. Wiring Harness
    4. Mounting Screws
    5. 7 Wire Nuts
2. Shall meet regulatory compliances
  1. UL
  2. c-UL
  3. FCC Class A
  4. California Title 24
3. Product Warranty
  1. Shall provide at least 3 years parts and labor
4. Approved device shall be the Extron OCS 100W, part number 60-1665-01; no alternates or equals

OCS 100W

Provide a wall-mount occupancy sensor designed with switching and control of AV equipment in mind.
1. Device shall allow for room automation when paired with devices equipped with a digital input.
  1. Device shall support the following technologies, allowing for both a wide coverage area and excellent detection capabilities:
    1. US - Ultrasonic
    2. PIR - Passive Infrared
  2. Device shall feature smart and adaptive software that automatically and continuously adjusts timer and sensitivity settings, allowing for a lifetime of maintenance-free operation.
  3. Device shall feature non-volatile memory for sensor settings.
  4. Device shall have a coverage area of 1,600 square feet.
  5. Device shall feature one green LED status indicator located on the top of the sensor that flashes when the Ultrasonic sensors detect occupancy.
  6. Device shall feature one red LED status indicator located on the bottom of the sensor that flashes when the infrared sensor detects occupancy.
  7. Device shall feature three color coded adjustment knobs located under a removable front cover that allows for the following adjustments:
    1. Red – Infrared sensitivity adjustment
    2. Green – Ultrasonic range adjustment
    3. Blue – Photocell sensitivity adjustment
  8. Device shall feature a blue button located under a removable front cover that allows for testing of the timer feature.
  9. Device shall feature two banks of DIP switches located under a removable front cover that allow for the following adjustments:
    1. LED indicators (Enabled / Disabled)
    2. Automatic adjust reset (Toggle)
    3. Timer setting (Pre-determined time interval)
    4. Timer adjust (Automatic / Manual)
    5. Sensitivity adjust (Automatic / Manual)
  10. Device shall include a 12VDC to 24VDC power converter allowing for use of a common power supply to be shared with the control processor
  11. Device shall include the following accessories:
    1. Mounting Plate
    2. Swiveling Post
    3. Wiring Harness
    4. Mounting Screws
    5. 7 Wire Nuts
2. Shall meet regulatory compliances
  1. UL
  2. c-UL
  3. FCC Class A
  4. California Title 24
3. Product Warranty
  1. Shall provide at least 3 years parts and labor
4. Approved device shall be the Extron OCS 100W, part number 60-1665-01; no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

OCS 100 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.