Página principal de Productos
Altavoces
Altavoces de montaje en superficie
Altavoces de columna Altavoces de techo Flat Field Altavoces de techo Altavoces colgantes Montaje y accesorios de altavoces Altavoces PoE Subwoofers
SM 3
Kit de montaje en superficie Montaje con articulación SM 26 SM 28 SM 3 SMK P SM 26/28 V-Lock

Twitter Copy Link

Imprimir

Profesional

SM 3

Altavoces compactos de rango completo y montaje en superficie SpeedMount

Características principales

Sistema de montaje oculto y patentado
Incluye placas de montaje de 0° y 10°
Diseñado para utilizarse en instalaciones con reparto de tareas y recortar gastos
Impedancia nominal de 8 Ω
Recinto acústico de 76 mm (3 in) de rango completo con puerto de reflexión de graves ajustado
Rango de frecuencia: 100 Hz a 20 kHz
Todas las características

Previous Next

Galería de imágenes

Visión general interactiva

Selector de altavoces

Descripciones para consultores

Casos de éxito

Calculador de altavoces

Altavoces vendidos por parejas

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El altavoz de montaje en superficie SpeedMount^® SM 3 es un compacto altavoz de rango completo con un sistema de montaje en pared oculto y patentado. Su carcasa mide menos de 102 mm (4 in) de profundidad. Este altavoz de 8 Ω dispone de un recinto acústico de rango completo de 76 mm (3 in) y un puerto de graves sintonizado, un amplio rango de frecuencia desde 100 Hz hasta 20 kHz, y una tasa de potencia de 15 W de ruido rosa continuo y 30 W de capacidad de programa continuo. Además, el sistema de montaje exclusivo de Extron está diseñado para utilizarse en instalaciones con reparto de tareas y recortar gastos.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

SM 3

Serie Retractor

BB 710M

SM 3

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

SM 3

Provide a compact, full-range 8 ohm surface mount speaker that shall accommodate division-of-labor installations.
1. Compact, full-range surface mount speaker with a single-ported enclosure, grille, 8 ohm nominal impedance, and a concealed mounting system
  1. Driver Requirements
    1. Shall consist of a 3" full-range driver with a tuned bass reflex port
  2. Performance Requirements
    1. Shall provide a frequency range of 75 Hz to 18 kHz, -10 dB below average SPL, measured on-axis in full space
    2. Shall provide a power capacity of 15 watts (rms) continuous pink noise per IEC 60268-5 and 30 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 83 dB SPL (1 W, 1 m) measured in full space
    4. Shall provide a nominal impedance of 8 ohms
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support incoming speaker level signal on one 2-pole, 10 mm Euro-style captive screw terminal block built into 0° and 10° mounting plate
      1. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      2. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Enclosure Requirements
    1. Shall consist of a plastic, trapezoidal enclosure with molded grill and bass reflex port
    2. Shall have a black or white finish
    3. Shall measure 8.75" (22.2 cm) in height when using 0° mounting plate
    4. Shall measure 8.9" (22.6 cm) in height when using 10° mounting plate
    5. Shall measure 5.75" (14.6 cm) in width when using 0° or 10° mounting plate
    6. Shall protrude 4.0" (10.2 cm) into environment from mounting surface when using 0° mounting plate
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits when using 0° mounting plate
    7. Shall protrude 5.0" (12.7 cm) into environment from mounting surface when using 10° mounting plate
    8. Shall weigh 2.1 lbs (1.0 kg) per speaker when using 0° mounting plate
  5. Mounting Requirements
    1. Shall include a 0° mounting plate for vertical, horizontal, or flush with the wall installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    2. Shall include a 10° mounting plate for vertical or horizontal speaker installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    3. Shall provide cable raceway access with 0° and 10° mounting plate for surface-mounted wiring
    4. Shall provide a hidden locking speaker release mechanism
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SM 3, part number 42-133-02 or 42-133-03; no alternates or equals.

SM 3

Provide a compact, full-range 8 ohm surface mount speaker that shall accommodate division-of-labor installations.
1. Compact, full-range surface mount speaker with a single-ported enclosure, grille, 8 ohm nominal impedance, and a concealed mounting system
  1. Driver Requirements
    1. Shall consist of a 3" full-range driver with a tuned bass reflex port
  2. Performance Requirements
    1. Shall provide a frequency range of 75 Hz to 18 kHz, -10 dB below average SPL, measured on-axis in full space
    2. Shall provide a power capacity of 15 watts (rms) continuous pink noise per IEC 60268-5 and 30 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 83 dB SPL (1 W, 1 m) measured in full space
    4. Shall provide a nominal impedance of 8 ohms
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support incoming speaker level signal on one 2-pole, 10 mm Euro-style captive screw terminal block built into 0° and 10° mounting plate
      1. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      2. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Enclosure Requirements
    1. Shall consist of a plastic, trapezoidal enclosure with molded grill and bass reflex port
    2. Shall have a black or white finish
    3. Shall measure 8.75" (22.2 cm) in height when using 0° mounting plate
    4. Shall measure 8.9" (22.6 cm) in height when using 10° mounting plate
    5. Shall measure 5.75" (14.6 cm) in width when using 0° or 10° mounting plate
    6. Shall protrude 4.0" (10.2 cm) into environment from mounting surface when using 0° mounting plate
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits when using 0° mounting plate
    7. Shall protrude 5.0" (12.7 cm) into environment from mounting surface when using 10° mounting plate
    8. Shall weigh 2.1 lbs (1.0 kg) per speaker when using 0° mounting plate
  5. Mounting Requirements
    1. Shall include a 0° mounting plate for vertical, horizontal, or flush with the wall installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    2. Shall include a 10° mounting plate for vertical or horizontal speaker installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    3. Shall provide cable raceway access with 0° and 10° mounting plate for surface-mounted wiring
    4. Shall provide a hidden locking speaker release mechanism
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SM 3, part number 42-133-02 or 42-133-03; no alternates or equals.

SM 3

Provide a compact, full-range 8 ohm surface mount speaker that shall accommodate division-of-labor installations.
1. Compact, full-range surface mount speaker with a single-ported enclosure, grille, 8 ohm nominal impedance, and a concealed mounting system
  1. Driver Requirements
    1. Shall consist of a 3" full-range driver with a tuned bass reflex port
  2. Performance Requirements
    1. Shall provide a frequency range of 75 Hz to 18 kHz, -10 dB below average SPL, measured on-axis in full space
    2. Shall provide a power capacity of 15 watts (rms) continuous pink noise per IEC 60268-5 and 30 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 83 dB SPL (1 W, 1 m) measured in full space
    4. Shall provide a nominal impedance of 8 ohms
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support incoming speaker level signal on one 2-pole, 10 mm Euro-style captive screw terminal block built into 0° and 10° mounting plate
      1. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      2. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Enclosure Requirements
    1. Shall consist of a plastic, trapezoidal enclosure with molded grill and bass reflex port
    2. Shall have a black or white finish
    3. Shall measure 8.75" (22.2 cm) in height when using 0° mounting plate
    4. Shall measure 8.9" (22.6 cm) in height when using 10° mounting plate
    5. Shall measure 5.75" (14.6 cm) in width when using 0° or 10° mounting plate
    6. Shall protrude 4.0" (10.2 cm) into environment from mounting surface when using 0° mounting plate
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits when using 0° mounting plate
    7. Shall protrude 5.0" (12.7 cm) into environment from mounting surface when using 10° mounting plate
    8. Shall weigh 2.1 lbs (1.0 kg) per speaker when using 0° mounting plate
  5. Mounting Requirements
    1. Shall include a 0° mounting plate for vertical, horizontal, or flush with the wall installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    2. Shall include a 10° mounting plate for vertical or horizontal speaker installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    3. Shall provide cable raceway access with 0° and 10° mounting plate for surface-mounted wiring
    4. Shall provide a hidden locking speaker release mechanism
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SM 3, part number 42-133-02 or 42-133-03; no alternates or equals.

SM 3

Provide a compact, full-range 8 ohm surface mount speaker that shall accommodate division-of-labor installations.
1. Compact, full-range surface mount speaker with a single-ported enclosure, grille, 8 ohm nominal impedance, and a concealed mounting system
  1. Driver Requirements
    1. Shall consist of a 3" full-range driver with a tuned bass reflex port
  2. Performance Requirements
    1. Shall provide a frequency range of 75 Hz to 18 kHz, -10 dB below average SPL, measured on-axis in full space
    2. Shall provide a power capacity of 15 watts (rms) continuous pink noise per IEC 60268-5 and 30 watts (rms) continuous program
    3. Shall provide a nominal sensitivity of 83 dB SPL (1 W, 1 m) measured in full space
    4. Shall provide a nominal impedance of 8 ohms
  3. Electrical Requirements
    1. Shall support 8 ohm direct connection from power amplifiers
    2. Shall support incoming speaker level signal on one 2-pole, 10 mm Euro-style captive screw terminal block built into 0° and 10° mounting plate
      1. Shall support a maximum wire gauge of 12 AWG per connection point for a single wire
      2. Shall support a maximum wire gauge of 16 AWG per connection point for two wires
  4. Enclosure Requirements
    1. Shall consist of a plastic, trapezoidal enclosure with molded grill and bass reflex port
    2. Shall have a black or white finish
    3. Shall measure 8.75" (22.2 cm) in height when using 0° mounting plate
    4. Shall measure 8.9" (22.6 cm) in height when using 10° mounting plate
    5. Shall measure 5.75" (14.6 cm) in width when using 0° or 10° mounting plate
    6. Shall protrude 4.0" (10.2 cm) into environment from mounting surface when using 0° mounting plate
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits when using 0° mounting plate
    7. Shall protrude 5.0" (12.7 cm) into environment from mounting surface when using 10° mounting plate
    8. Shall weigh 2.1 lbs (1.0 kg) per speaker when using 0° mounting plate
  5. Mounting Requirements
    1. Shall include a 0° mounting plate for vertical, horizontal, or flush with the wall installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    2. Shall include a 10° mounting plate for vertical or horizontal speaker installation
      1. Shall support both enclosure mounting and electrical connection as speaker is placed on mount
      2. Shall have a black or white finish to match speaker
    3. Shall provide cable raceway access with 0° and 10° mounting plate for surface-mounted wiring
    4. Shall provide a hidden locking speaker release mechanism
  6. General Requirements
    1. Shall be sold in pairs
    2. Shall meet regulatory compliances
      1. Shall comply with appropriate requirements of RoHS and WEE
    3. Shall provide five year parts and labor warranty
2. Approved device shall be the Extron SM 3, part number 42-133-02 or 42-133-03; no alternates or equals.

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

SM 3 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

SM 3

Altavoces compactos de rango completo y montaje en superficie SpeedMount

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.