Página principal de Productos
Amplificadores de potencia
Amplificadores de potencia
Amplificadores de potencia en red
XPA 2004
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 1004C XPA U 2002 SB XPA U 3502 XPA U 358 XPA U 358C XPA U 758

Imprimir

Profesional

XPA 2004

Amplificador de cuatro canales - 200 W por canal

Características principales

800 W rms de potencia de salida:
4 x 200 W a 4 Ω; 4 x 100 W a 8 Ω; 2 x 400 W a 8 Ω (puenteado)
Amplificador homologado por ENERGY STAR^®
Rendimiento de la relación señal/ruido y THD+R de nivel profesional
CDRS^™ – supresión de rizado en clase D, patentada por Extron
Funcionamiento de refrigeración por convección, sin ventilador
Corriente de inserción ultra baja, sin necesidad de secuencia de encendido
Todas las características

Galería de imágenes

Visión global interactiva

Comparar características

Calculadores de audio

Selector de amplificador

Esta nueva herramienta le permite buscar modelos de amplificador según sus características

Descripciones para consultores

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El XPA 2004 de la serie XTRA^™ de Extron es un amplificador de potencia de 1U y refrigerado por convección que proporciona cuatro canales de 200 W a 4 Ω o 100 W a 8 Ω. Este amplificador de nivel profesional dispone de una relación señal/ruido de 100 dB con THD+R de 0,1%. El XPA 2004 es un amplificador homologado por ENERGY STAR^® con un diseño de amplificador de clase D avanzado, de elevada eficacia, exclusivo de Extron. También dispone de la tecnología patentada CDRS^™ – supresión de rizado en clase D que proporciona una forma de onda de audio suave y limpia y una mejora de la fidelidad de la señal con respecto a los amplificadores de clase D convencionales. El XPA 2004 mide la mitad que otros amplificadores comparables, por lo que preserva el espacio del rack y pesa solo 4 kg (9 lb). Su diseño exclusivo de Extron, de elevada eficacia, genera muy poco calor y permite la refrigeración por convección del amplificador.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

XPA 2004

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

XPA 2004

Provide a compact, energy efficient audio amplifier that shall support four analog inputs and four amplified outputs with 100 or 200 watts rms power output per channel.
1. Compact amplifier with four channels of 100 or 200 watts rms power output and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to either input 1 or input 3 for bridged output operation
  2. Output Requirements
    1. Shall support four speaker level signals on two 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 200 watts rms per channel into 4 ohms, or 100 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of either pair of outputs to provide 400 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 146.5 watts during typical (1/8 power) operation with four output channels driven with 4 ohm loads
    2. Shall draw 89.3 watts during typical (1/8 power) operation with four output channels driven with 8 ohm loads
    3. Shall draw 28.7 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide two switches for selecting bridged operation of either pair of outputs
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, PSE, S-Mark, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR Class B, CISPR 24, C-tick, ED55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three years parts and labor warranty
2. Approved device shall be the Extron XPA 2004, part number 60-563-02; no alternates or equals.

XPA 2004

Provide a compact, energy efficient audio amplifier that shall support four analog inputs and four amplified outputs with 100 or 200 watts rms power output per channel.
1. Compact amplifier with four channels of 100 or 200 watts rms power output and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to either input 1 or input 3 for bridged output operation
  2. Output Requirements
    1. Shall support four speaker level signals on two 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide a total of 800 watts rms output power with 200 watts rms per channel into 4 ohms, or 100 watts rms per channel into 8 ohms measured at 1 kHz with less than 0.05% THD
    3. Shall support bridging of either pair of outputs to provide 400 watts rms output power into 8 ohms measured at 1 kHz with less than 0.05% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall support a minimum load impedance of 4 ohms under normal operation or 8 ohms during bridged operation
    6. Shall provide a THD+N measurement of 0.1% measured from 20 Hz to 20 kHz, at 1 kHz and 3 dB below clipping
    7. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 146.5 watts during typical (1/8 power) operation with four output channels driven with 4 ohm loads
    2. Shall draw 89.3 watts during typical (1/8 power) operation with four output channels driven with 8 ohm loads
    3. Shall draw 28.7 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall be ENERGY STAR qualified
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on two 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide standby control port on one 2-pole, 3.5 mm captive screw connector
    4. Shall provide recessed, detented potentiometers for attenuation adjustment
    5. Shall provide two switches for selecting bridged operation of either pair of outputs
    6. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    7. Shall provide green LEDs for input signal presence indication
    8. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, PSE, S-Mark, and UL
      2. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      3. Shall meet EMI/EMC compliances under CE, CISPR Class B, CISPR 24, C-tick, ED55103-1, EN55103-2, FCC Class B, ICES, KCC, and VCCI Class B
      4. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three years parts and labor warranty
2. Approved device shall be the Extron XPA 2004, part number 60-563-02; no alternates or equals.

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

XPA 2004 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.