Página principal de Productos
HDMI
Extensores HDMI
Amplificadores de distribución HDMI Conmutadores HDMI Matrices de conmutación HDMI Escaladores y procesadores de señal HDMI Módulos HDMI de conectividad AV Cables y adaptadores HDMI Gestión EDID
DTP2 T 204
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T DWP 4K 232 D DTP T DWP 4K 332 D DTP T EU 232 DTP T EU 4K 231 DTP T EU 4K 331 DTP T FB 232 DTP T FB 332 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T MK 4K 231 DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 201 D DTP2 T 202 FB DTP2 T 203 DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 R 301 DTP3 T 202 DTP3 T 203 DTP3 T 301 eLink 100 FOX II T HD 4K FOX T USW 103 FOX T USW 203 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HC 402 HC 402 EU HC 403 HC 404 HD 4K 101 Plus HFX 100 PowerCage 1600 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI PowerCage FOX SR HDMI Serie HD Pro Plenum

Imprimir

Profesional

DTP2 T 204

Conmutador HDMI 4K/60 de cuatro entradas con transmisor DTP2 integrado

Características principales

Transmite HDMI y control hasta 100 m (330 ft) a través de un cable blindado CATx
Soporta resoluciones de vídeo de ordenador y vídeo hasta 4K/60 a 4:4:4
Conmutación automática entre entradas
Admite la especificación HDMI 2.0b, incluyendo tasas de datos de hasta 18 Gbps, HDR, Deep Color hasta 12 bits, 3D, formatos de audio HD sin pérdidas y CEC
Admite vídeo HDR – alto rango dinámico
Conformidad a HDCP 2.3
Todas las características

Previous Next

Se recomienda encarecidamente el uso del cable XTP DTP 24 de par trenzado blindado de Extron

Galería de imágenes

Visión global interactiva

Vídeos destacados

Premios

Connected Magazine Most Popular

DTP Selector

TeamWork System Builder

TeamWork System Builder

Descripciones para consultores

Calculador de tasas de datos 8K

Casos de éxito

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El DTP2 T 204 de Extron es un conmutador de cuatro entradas para enviar HDMI y control hasta 100 m (330 ft) a través de un cable blindado CATx a un producto que disponga de DTP^® de Extron. Proporciona cuatro entradas HDMI y una salida DTP2. Este transmisor admite señales de vídeo a resoluciones hasta 4K/60 con muestreo de croma 4:4:4 y es conforme a HDCP 2.3. El control remoto Ethernet y las conexiones de cierre de contacto/tally facilitan la integración en entornos profesionales. Entre las características de fácil integración se incluyen EDID Minder^®, conmutación automática entre entradas, y paso de IR y RS‑232 bidireccional para el control de dispositivos AV remotos. Además, su carcasa de medio ancho de rack permite una colocación discreta en atriles, bajo mesas o donde sea necesario para cumplir con los requisitos de la aplicación.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

DTP2 T 204

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP2 T 204

Provide a twisted pair switcher that shall support four HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CATx cable
1. Rack-mountable switcher for the extension of HDMI, audio, and control
2. Video input requirements
  1. Shall provide four (4) HDMI inputs for digital video signals
    1. HDMI 2.0b specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC
  2. Shall support digital video resolutions up to 3840x2160/60 @ 4:4:4 chroma sampling
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI inputs
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP®-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 and IR signals to an HDBaseT™-enabled display
5. Switching requirements
  1. Shall Provide configurable automatic switching modes between input sources
    1. Last connected: always switch to the last active connected input
    2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
6. CATx cable transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CATx cable
  2. Shall support video, audio, and control over a single shielded CATx cable
  3. Shall actively buffer DDC channels
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over Ethernet, RS-232 or USB connection
9. Audio requirements
  1. Shall support multiple embedded audio formats
  2. Shall support embedded HD lossless audio formats
10. Communications requirements
  1. Shall support bidirectional RS-232 communication pass-through up to 115200 baud
  2. Shall support bidirectional IR pass-through
  3. Shall support EDID and HDCP transmission
11. Control/Remote – RS-232 and IR pass-through over shielded CATx requirements
  1. Shall provide connection for AV device control
    1. One (1) 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
    2. RS-232 serial communication insertion from Ethernet port
12. Control/Remote – switcher control requirements
  1. Shall provide connections for remote switcher control
    1. One (1) 3-pole captive screw: RS-232
    2. Mini USB-B: USB 2.0 on front panel
    3. One (1) 5-pole captive screw: contact closure/tally
    4. Three (3) 4-pole captive screw: contact closure/tally
    5. One (1) RJ-45: 10/100 Ethernet port
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via USB or Ethernet
    3. Serial commands sent over Ethernet, RS-232, USB connection
    4. Contact closure ports configurable for use as input selection
    5. Tally outputs that provide +5 VDC to light an LED. indicating the currently selected input
    6. Contact closure and tally ports configurable for independent use
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
13. Power requirements
  1. Shall accept remote power from a DTP2-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP2 receiver
14. General requirements
  1. Shall include a USB configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link status LEDs on rear panel
    2. LAN signal and link status LEDs on rear panel
    3. Power status on front panel
    4. Auto-switching selection status LED on front panel
    5. Signal presence and HDCP status LEDs for active input/s on front panel
  3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1-RU high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
  9. Shall be compatible with all Extron DTP-enabled products
15. Approved device shall be the Extron DTP2 T 204 (60-1626-01); no alternates or equals

DTP2 T 204

Provide a twisted pair switcher that shall support four HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CATx cable
1. Rack-mountable switcher for the extension of HDMI, audio, and control
2. Video input requirements
  1. Shall provide four (4) HDMI inputs for digital video signals
    1. HDMI 2.0b specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC
  2. Shall support digital video resolutions up to 3840x2160/60 @ 4:4:4 chroma sampling
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI inputs
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP®-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 and IR signals to an HDBaseT™-enabled display
5. Switching requirements
  1. Shall Provide configurable automatic switching modes between input sources
    1. Last connected: always switch to the last active connected input
    2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
6. CATx cable transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CATx cable
  2. Shall support video, audio, and control over a single shielded CATx cable
  3. Shall actively buffer DDC channels
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over Ethernet, RS-232 or USB connection
9. Audio requirements
  1. Shall support multiple embedded audio formats
  2. Shall support embedded HD lossless audio formats
10. Communications requirements
  1. Shall support bidirectional RS-232 communication pass-through up to 115200 baud
  2. Shall support bidirectional IR pass-through
  3. Shall support EDID and HDCP transmission
11. Control/Remote – RS-232 and IR pass-through over shielded CATx requirements
  1. Shall provide connection for AV device control
    1. One (1) 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
    2. RS-232 serial communication insertion from Ethernet port
12. Control/Remote – switcher control requirements
  1. Shall provide connections for remote switcher control
    1. One (1) 3-pole captive screw: RS-232
    2. Mini USB-B: USB 2.0 on front panel
    3. One (1) 5-pole captive screw: contact closure/tally
    4. Three (3) 4-pole captive screw: contact closure/tally
    5. One (1) RJ-45: 10/100 Ethernet port
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via USB or Ethernet
    3. Serial commands sent over Ethernet, RS-232, USB connection
    4. Contact closure ports configurable for use as input selection
    5. Tally outputs that provide +5 VDC to light an LED. indicating the currently selected input
    6. Contact closure and tally ports configurable for independent use
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
13. Power requirements
  1. Shall accept remote power from a DTP2-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP2 receiver
14. General requirements
  1. Shall include a USB configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link status LEDs on rear panel
    2. LAN signal and link status LEDs on rear panel
    3. Power status on front panel
    4. Auto-switching selection status LED on front panel
    5. Signal presence and HDCP status LEDs for active input/s on front panel
  3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1-RU high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
  9. Shall be compatible with all Extron DTP-enabled products
15. Approved device shall be the Extron DTP2 T 204 (60-1626-01); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

DTP2 T 204 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.