Página principal de Productos
HDMI
Extensores HDMI
Amplificadores de distribución HDMI Conmutadores HDMI Matrices de conmutación HDMI Escaladores y procesadores de señal HDMI Módulos HDMI de conectividad AV Cables y adaptadores HDMI Gestión EDID
DTP3 T 203
DTP HDMI 4K 230 Rx DTP HDMI 4K 230 Tx DTP HDMI 4K 330 Rx DTP HDMI 4K 330 Tx DTP R HWP 4K 231 D DTP R HWP 4K 331 D DTP T DSW 4K 233 DTP T EU 232 DTP T EU 4K 231 DTP T EU 4K 331 DTP T HD2 4K 230 DTP T HD2 4K 330 DTP T HWP 232 D DTP T HWP 4K 231 D DTP T HWP 4K 331 D DTP T MK 4K 231 DTP T SW4 HD 4K DTP T USW 233 DTP T USW 333 DTP2 R 211 DTP2 R 212 DTP2 T 202 FB DTP2 T 204 DTP2 T 211 DTP2 T 212 DTP3 R 201 DTP3 R 301 DTP3 R 331 DTP3 T 101 D DTP3 T 202 DTP3 T 202 EU/MK DTP3 T 203 DTP3 T 212 D DTP3 T 301 DTP3 T 322 D DTP3 T 331 eLink 100 FOX II T HD 4K FOX T USW 203 FOX3 R 111 FOX3 R 311 FOX3 SR 201 FOX3 SR 201 PC FOX3 SR 301 FOX3 SR 301 PC FOX3 SR 311 FOX3 SR 311 PC FOX3 T 111 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HC 402 HC 404 HD 4K 101 Plus PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD Serie HD Pro Plenum

Twitter Copy Link

Imprimir

Profesional

DTP3 T 203

Conmutador 4K/60 de tres entradas con transmisor DTP3 integrado

Características principales

Transmite vídeo USB-C^®, HDMI, audio embebido, alimentación y control hasta 100 m (330 ft) a través de un cable CAT 6A blindado
Admite resoluciones de vídeo hasta 4K/60 a 4:4:4, incluyendo 5K
Proporciona hasta 60 W de potencia a la fuente USB‑C
Admite relaciones de aspecto ultra panorámicas, incluyendo 21:9 y 5K
Conmutación automática entre entradas
Admite la especificación HDMI 2.0b, incluyendo tasas de datos de hasta 18 Gbps, HDR, Deep Color hasta 12 bits, 3D, formatos de audio HD sin pérdidas y CEC
Todas las características

Previous Next

Se recomienda encarecidamente el cable XTP DTP 22 de par trenzado blindado de Extron

Galería de imágenes

Visión general interactiva

Vídeos destacados

Selector de DTP

Ayuda sobre productos

Descripciones para consultores

Calculador de tasas de datos 8K

Casos de éxito

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El DTP3 T 203 de Extron es un transmisor de tres entradas para enviar vídeo USB-C^®, HDMI, audio embebido, alimentación y control hasta 100 m (330 ft) a través de un cable blindado CAT 6A. Admite resoluciones de vídeo hasta 4K/60 a 4:4:4 y es conforme a HDCP 2.3. Para una máxima calidad de imagen y mínima latencia, todas las resoluciones de vídeo son transportadas sin compresión. Las salidas HDMI y DTP con buffer, la 60 W de carga USB-C y el control Ethernet remoto facilitan la integración en entornos profesionales. Entre las características de fácil integración se incluyen EDID Minder^®, conmutación automática entre entradas y paso de RS‑232 bidireccional para el control de dispositivos AV remotos. La carcasa de medio ancho de rack estándar del transmisor DTP3 T 203 permite una colocación discreta en atriles, bajo mesas o donde sea necesario para cumplir con los requisitos de la aplicación.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

DTP3 T 203

SY DVIAM‑RGBHVF

NBP 104 EU

DTP3 T 101 D

MLC Plus 200 AAP

DTP3 R 331

XPA U 1004 SB

FOX3 R 311

SSP 200

FOX Matrix 320x

NBP VC2 D

Serie USBA-B

DTP3 T 203

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP3 T 203

Provide a twisted pair switcher that shall support one USB-C® input and two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CAT 6A cable
1. Rack-mountable switcher for the extension of USB-C, HDMI, audio, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  2. Shall provide two (2) HDMI inputs for digital video signals
    1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support embedded digital audio on HDMI inputs
  3. Shall support multiple embedded audio formats
  4. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
  3. Shall provide one (1) mirrored HDMI output
5. Switching requirements
  1. Shall provide configurable automatic switching modes between input sources
    1. Last connected: always switch to the last active connected input
    2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over Ethernet, RS-232 or USB connection
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
    2. RS-232 serial communication insertion from Ethernet port
10. Control/Remote – switcher control requirements
  1. Shall provide connections for remote switcher control
    1. One (1) 3-pole captive screw: RS-232
    2. USB-C port on front panel
    3. One (1) 4-pole captive screw: contact closure in
    4. One (1) 4-pole captive screw: tally out
    5. One (1) RJ-45: 10/100 Ethernet port
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via Ethernet and USB
    3. Serial commands sent over Ethernet, RS-232 and USB connection
    4. Contact closure ports for use as input selection
    5. Tally output that provide +5 VDC to light an LED. indicating the currently selected input
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP3 receiver
  2. Shall support USB-C device charging up to 60 watts
12. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link status LEDs on rear panel
    2. LAN signal and link status LEDs on rear panel
    3. Power status on front panel
    4. Auto-switching selection status LED on front panel
    5. Signal presence and HDCP status LEDs for active input/s on front panel
  3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1U high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
13. Approved device shall be the Extron DTP3 T 203 (60-1885-52); no alternates or equals

DTP3 T 203

Provide a twisted pair switcher that shall support one USB-C® input and two HDMI inputs, and shall provide long distance signal distribution of video, audio, and control over a shielded CAT 6A cable
1. Rack-mountable switcher for the extension of USB-C, HDMI, audio, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  2. Shall provide two (2) HDMI inputs for digital video signals
    1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support embedded digital audio on HDMI inputs
  3. Shall support multiple embedded audio formats
  4. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
  3. Shall provide one (1) mirrored HDMI output
5. Switching requirements
  1. Shall provide configurable automatic switching modes between input sources
    1. Last connected: always switch to the last active connected input
    2. Configurable priority: switching priority may be assigned arbitrarily for any combination of the four inputs
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant
  2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
  3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
  4. Shall provide real-time verification of HDCP status for each digital video input
    1. Accessible through front panel LEDs
    2. Electronically accessible over Ethernet, RS-232 or USB connection
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
    2. RS-232 serial communication insertion from Ethernet port
10. Control/Remote – switcher control requirements
  1. Shall provide connections for remote switcher control
    1. One (1) 3-pole captive screw: RS-232
    2. USB-C port on front panel
    3. One (1) 4-pole captive screw: contact closure in
    4. One (1) 4-pole captive screw: tally out
    5. One (1) RJ-45: 10/100 Ethernet port
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Product configuration software connected via Ethernet and USB
    3. Serial commands sent over Ethernet, RS-232 and USB connection
    4. Contact closure ports for use as input selection
    5. Tally output that provide +5 VDC to light an LED. indicating the currently selected input
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall provide DIP switch on rear panel for selection to provide power to a connected DTP3 receiver
  2. Shall support USB-C device charging up to 60 watts
12. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall provide directly readable real-time verification of signal flow and operation
    1. RJ-45 signal and link status LEDs on rear panel
    2. LAN signal and link status LEDs on rear panel
    3. Power status on front panel
    4. Auto-switching selection status LED on front panel
    5. Signal presence and HDCP status LEDs for active input/s on front panel
  3. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
  5. Shall have a 1U high, half rack width metal enclosure
  6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
  7. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  8. Shall provide at least three (3) years parts and labor warranty
13. Approved device shall be the Extron DTP3 T 203 (60-1885-52); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

DTP3 T 203 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

DTP3 T 203

Conmutador 4K/60 de tres entradas con transmisor DTP3 integrado

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.