Página principal de Productos
USB para AV profesional
Extensores USB
Puentes de AV a USB Conmutadores de colaboración USB Matrices de conmutación USB Conmutadores USB Hubs USB Módulos de conectividad AV USB Cables y adaptadores USB Productos de alimentación USB Productos USB-C
Serie DTP3 CrossPoint 42
DTP3 R 301 DTP3 R 331 DTP3 T 301 DTP3 T 321 DTP3 T 322 D DTP3 T 331 FOX USB Extender Plus Serie DTP3 CrossPoint 42 Serie UCS 900 Serie UCS 910 Serie USB Extender Plus UCS 504 USB Extender xi Series

Twitter Copy Link

Imprimir

Profesional

Serie DTP3 CrossPoint 42

Matrices de conmutación 4K/60 con escalador sin salto de 4x2

Características principales

Integra fuentes USB‑C^® y HDMI en sistemas de presentación
Salida DTP3 que soporta transmisión de vídeo con audio embebido, datos USB, control y alimentación hasta 100 m (330 ft) a través de un cable CAT 6A blindado
Conecta fuentes USB‑C que soportan modo alternativo DisplayPort
Proporciona alimentación para cargar la fuente USB‑C
Motor de escalado avanzado Vector™ 4K de Extron
Soporte de datos USB disponible con extensión a larga distancia
Todas las características

DTP3 CrossPoint 42 USB - with USB switching and extension

Previous Next

Galería de imágenes

Visión general interactiva

Vídeos destacados

Patrón de ajuste 4:4:4

Selector de DTP

Ayuda sobre productos

Descripciones para consultores

Calculador de tasas de datos 8K

Casos de éxito

Nota: la DTP3 CrossPoint 42 USB no es compatible con el DTP3 R 301 para la extensión de datos USB.

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

La DTP3 CrossPoint 42 USB de Extron es una compacta matriz de conmutación de 4x2 que admite datos USB 10Gbps en el puerto host USB‑C^® local y el hub de cuatro puertos, además de conmutación host y extensión de datos USB 2. Incorpora el exclusivo motor de escalado Vector™ 4K de Extron con capacidad de vídeo 4K/60 4:4:4, y dispone de entradas USB-C y HDMI, salidas HDMI y una salida DTP3 para la extensión de señales de vídeo, audio embebido, datos USB, alimentación y control hasta 100 m (330 ft) a través de un cable CAT 6A blindado. La DTP3 CrossPoint 42 está disponible para aplicaciones que no requieren datos USB. Ambos modelos proporcionan características avanzadas como carga USB‑C, desembebido de audio, efectos de transición sin salto e inserción de logos. Cargada con estas características y más, la DTP3 CrossPoint 42 USB y la DTP3 CrossPoint 42 entregan conmutación AV rápida y fiable en entornos profesionales.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

Serie DTP3 CrossPoint 42

USB PowerPlate 400 Series

Módulos de alimentación de la serie AC+USB 300

MMK 6

ATB 220

AC+USB 400 Series Power Modules

LockIt Plus

IPCP Pro 550 xi

ControlScript Deployment Utility

ControlScript Extension para VS Code

IPCP Pro 355DR

Serie DTP3 CrossPoint 42

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP3 CrossPoint 42 USB

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. USB data and switching requirements
  1. USB host connections
    1. One (1) USB-C, shared with video input 1
    2. Two (2) USB type B
    3. Shall support data transfer rates up to USB 10Gbps
  2. Connections at four-port USB device hub
    1. Two (2) USB type A
      1. Shall support transfer rates up to 10 Gbps
    2. Two (2) USB type A
      1. Shall support transfer rates up to 480 Mbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
  4. USB host switching requirements
    1. USB host switching shall be independent of video switching
    2. Local 10 Gbps device ports shall always follow the selected host
    3. Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
6. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
7. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
8. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
9. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
10. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
  3. Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
12. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals

DTP3 CrossPoint 42 USB

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, USB host switching, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, USB data, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. USB data and switching requirements
  1. USB host connections
    1. One (1) USB-C, shared with video input 1
    2. Two (2) USB type B
    3. Shall support data transfer rates up to USB 10Gbps
  2. Connections at four-port USB device hub
    1. Two (2) USB type A
      1. Shall support transfer rates up to 10 Gbps
    2. Two (2) USB type A
      1. Shall support transfer rates up to 480 Mbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
  4. USB host switching requirements
    1. USB host switching shall be independent of video switching
    2. Local 10 Gbps device ports shall always follow the selected host
    3. Local 480 Gbps devices ports shall follow the selected host or be assignable to either USB type B host port regardless of selected host
6. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
7. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
8. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
9. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
10. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
11. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connections
  3. Shall provide remote power to first-generation DTP receivers over the shielded CAT 6A connections
12. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 USB(part number 60-1925-02); no alternates or equals

DTP3 T CrossPoint 42

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
6. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
7. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
8. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
9. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
10. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
  3. Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
11. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals

DTP3 T CrossPoint 42

Provide a scaling presentation matrix switcher that shall support 4x2 matrix switching of video sources, 4K upscaling and downscaling, and signal extension over shielded CAT 6A cable
1. Rack-mountable scaler and matrix switcher for USB-C and HDMI video sources and associated digital and analog audio
2. Video input requirements
  1. Video input connections
    1. One (1) USB-C for digital video signals
      1. Shall support USB-C sources with DisplayPort Alt Mode
    2. Three (3) HDMI inputs for digital video signals
      1. Shall support HDMI 2.0b specifications including data rates up to 18 Gbps, Deep Color up to 12-bit, and HD lossless audio formats
  2. Shall provide automatic 3:2 and 2:2 pulldown detection
3. Video output requirements
  1. Video output connections
    1. Two (2) switched video output channels
      1. One (1) mirrored HDMI/RJ-45 for video to Extron DTP3 twisted pair receivers
        
        DTP3 output shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
        
        DTP3 output shall support video, audio, RS-232, and power transmission over a single shielded CAT 6A cable
        
        DTP3 output shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
        
        DTP3 output shall be configurable for compatibility with
        
        Extron DTP inputs
        
        Extron DTP3 inputs
        
        HDBaseT inputs
        
        DTP3 and HDMI outputs shall support simultaneous content for local monitoring
      2. One (1) HDMI
    2. Shall provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
    3. Shall provide image scaling and video format conversion with 30-bit precision and 4:4:4 chroma sampling
    4. Shall provide motion adaptive deinterlacing for signals up to 1080i
    5. Shall provide aspect ratio control
      1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
      2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
    6. Shall provide internal test patterns for calibration and setup
    7. Shall support image freeze control
    8. Shall support upload and placement of a custom logo graphic at any position on the video output
    9. Shall support logo placement as a foreground image
    10. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
    11. Shall support displaying full screen images up to 4096x2160 resolution
    12. Shall support up to 16 logo presets
    13. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
    14. Shall provide a low power standby state selectable via Ethernet or USB
    15. Shall support the connection of DVI displays that do not recognize HDMI-specific formats
      1. Automatically enable or disable embedded TMDS audio and InfoFrames
      2. Automatically set the correct color space
    16. Shall support selection of output color space as RGB or component video
4. Video Switching requirements
  1. Shall provide video matrix switching between any input and any output
    1. Shall support routing of scaled 4K or UHD video signals to all outputs
  2. Shall provide selectable transition effects when switching inputs
    1. Seamless Cut: video output shall freeze, then cut to the newly selected input source
    2. Seamless Fade: video output shall freeze, then fade into the newly selected input source
    3. Cut through black: video output shall cut to black, then cut to the newly selected input source
    4. Fade through black: video output shall fade to black, then fade into the newly selected input source
5. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Shall provide a set of pre-stored EDID files
    2. Shall support capture of EDID from any connected display
    3. Shall support user uploading of custom-generated EDID files
    4. Shall support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
6. HDCP requirements
  1. The unit shall be HDCP 2.3 compliant
    1. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
    2. Shall provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
    3. Shall provide the option to disable HDCP processing at any input connection when passing unencrypted content
    4. Shall provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
      1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
      2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
      3. When disabled, the output shall be muted
    5. Shall provide real-time verification of HDCP status for each input and output electronically accessible over Ethernet or USB connection
7. Audio requirements
  1. Audio input connections
    1. One (1) USB-C, embedded
    2. Three (3) HDMI, embedded
  2. Audio output connections
    1. One (1) simultaneous DTP3 and HDMI, embedded
    2. One (1) separately switched HDMI, embedded
    3. One (1) 5-pole 3.5mm captive screw, with output level control and configurable for balanced/unbalanced, analog stereo or dual mono
  3. Shall support extraction of two-channel PCM embedded audio signals to the analog stereo output, or pass bitstream audio to the HDMI and DTP3 outputs
  4. Shall support storage and playback of up to 16 audio files
8. Control/remote - RS-232 pass-through over shielded CAT 6A requirements
  1. Shall support Ethernet insertion of RS-232 signals for transmission to a DTP3 endpoint
9. Control/remote - switcher requirements
  1. Control connections
    1. One (1) RJ-45: 10/100/1000Base-T Ethernet
    2. One (1) USB-C: USB 2.0
  2. Shall provide alternatives for configuration and operation
    1. Front panel controls
    2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
    3. Product configuration software connected via Ethernet, or USB
    4. Serial commands sent over Ethernet or USB connection
  3. Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
10. Power requirements
  1. Shall support USB-C device charging up to 60 watts
  2. Shall provide remote power to DTP3 receivers over the shielded CAT 6A connection
  3. Shall provide remote power to first-generation receivers over the shielded CAT 6A connection
11. General requirements
  1. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  2. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  3. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE, c-UL, and UL
    2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  4. Shall provide three year parts and labor warranty
Approved device shall be the Extron DTP3 CrossPoint 42 (part number 60-1925-01); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

Serie DTP3 CrossPoint 42 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

Serie DTP3 CrossPoint 42

Matrices de conmutación 4K/60 con escalador sin salto de 4x2

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.