Página principal de Productos
USB para AV profesional
Extensores USB
Puentes de AV a USB Conmutadores de colaboración USB Matrices de conmutación USB Conmutadores USB Hubs USB Módulos de conectividad AV USB Cables y adaptadores USB Productos de alimentación USB Productos USB-C
DTP3 T 322 D
DTP3 R 301 DTP3 R 331 DTP3 T 301 DTP3 T 321 DTP3 T 322 D DTP3 T 331 FOX USB Extender Plus Serie DTP3 CrossPoint 42 Serie UCS 900 Serie UCS 910 Serie USB Extender Plus UCS 504 USB Extender xi Series

Twitter Copy Link

Imprimir

Nuevo Profesional

DTP3 T 322 D

Transmisor DTP3 4K/60 de dos entradas para HDMI y USB‑C con datos – Placa mural de estilo Decorator

Características principales

Transmite vídeo con audio embebido, datos USB, alimentación y control hasta 100 m (330 ft) a través de un cable blindado CAT 6A
Soporta resoluciones de vídeo hasta 4K/60 a 4:4:4, incluyendo 5K
Conecta fuentes USB‑C que soportan modo alternativo DisplayPort
Conexión host USB‑C
Transmite alimentación y carga un dispositivo USB‑C de hasta 100 W utilizando el inyector de alimentación opcional UPI 100
Extensión USB 2
Todas las características

Previous Next

Se recomienda encarecidamente el cable XTP DTP 22 de par trenzado blindado de Extron

Galería de imágenes

Visión general interactiva

Vídeos destacados

Selector de DTP

Descripciones para consultores

Calculador de tasas de datos 8K

Casos de éxito

Nota: el DTP3 T 322 D no es compatible con el DTP3 R 301 para extender datos USB.

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El DTP3 T 322 D de Extron es un transmisor de dos entradas en placa mural para enviar vídeo USB-C^®, HDMI, datos, audio embebido, alimentación y control hasta 100 m (330 ft) a través de un cable blindado CAT 6A. Dispone de carga USB-C de hasta 100 W cuando se utiliza con el inyector de alimentación UPI 100 de Extron. Admite resoluciones de vídeo hasta 4K/60 a 4:4:4 y es conforme a HDCP 2.3. Para una máxima calidad de imagen y mínima latencia, todas las resoluciones de vídeo son transportadas sin compresión. Ofrece muchas características de fácil integración como EDID Minder^®, conmutación automática entre entradas, capacidad de alimentación remota y extensión de RS‑232 bidireccional para el control de dispositivos AV remotos. Disponible en negro o blanco, el diseño de montaje en pared proporciona la comodidad de colocar conexiones de entrada en el lugar exacto donde se necesitan.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

DTP3 T 322 D

Serie DTP3 CrossPoint 42

USB PowerPlate 400 Series

Módulos de alimentación de la serie AC+USB 300

MMK 6

ATB 220

AC+USB 400 Series Power Modules

LockIt Plus

IPCP Pro 550 xi

ControlScript Deployment Utility

ControlScript Extension para VS Code

IPCP Pro 355DR

DTP3 T 322 D

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP3 T 322 D - Black

Provide a wallplate twisted pair transmitter that shall support the distribution of HDMI and USB-C video with data over a shielded CAT 6A cable
1. Two-gang decorator-style wallplate transmitter for the extension of HDMI and USB-C video with data
2. Video input requirements
  1. Shall provide one (1) HDMI input for digital video signals
    1. Shall support HDMI 2.0 specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
  2. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall support RGB and YCbCr digital video formats
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI and USB-C inputs
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data and extension requirements
  1. USB host connections
    1. One (1) USB-C
  2. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Power requirements
  1. Shall accept remote power from a DTP3-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
10. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  3. Shall provide visual indication of signal presence on front of wallplate
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI, KCC
    3. Appropriate requirements of RoHS and WEEE
    4. UL-rated for use in plenum airspaces; meets UL 2043 for heat and smoke release, excluding the power supply
  5. Shall provide at least three (3) years parts and labor warranty
11. Approved device shall be the Extron DTP3 T 322 D, black (60-2066-52); no alternates or equals

DTP3 T 322 D - Black

Provide a wallplate twisted pair transmitter that shall support the distribution of HDMI and USB-C video with data over a shielded CAT 6A cable
1. Two-gang decorator-style wallplate transmitter for the extension of HDMI and USB-C video with data
2. Video input requirements
  1. Shall provide one (1) HDMI input for digital video signals
    1. Shall support HDMI 2.0 specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
  2. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall support RGB and YCbCr digital video formats
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI and USB-C inputs
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data and extension requirements
  1. USB host connections
    1. One (1) USB-C
  2. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Power requirements
  1. Shall accept remote power from a DTP3-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
10. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  3. Shall provide visual indication of signal presence on front of wallplate
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI, KCC
    3. Appropriate requirements of RoHS and WEEE
    4. UL-rated for use in plenum airspaces; meets UL 2043 for heat and smoke release, excluding the power supply
  5. Shall provide at least three (3) years parts and labor warranty
11. Approved device shall be the Extron DTP3 T 322 D, black (60-2066-52); no alternates or equals

DTP3 T 322 D - White

Provide a wallplate twisted pair transmitter that shall support the distribution of HDMI and USB-C video with data over a shielded CAT 6A cable
1. Two-gang decorator-style wallplate transmitter for the extension of HDMI and USB-C video with data
2. Video input requirements
  1. Shall provide one (1) HDMI input for digital video signals
    1. Shall support HDMI 2.0 specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
  2. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall support RGB and YCbCr digital video formats
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI and USB-C inputs
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data and extension requirements
  1. USB host connections
    1. One (1) USB-C
  2. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Power requirements
  1. Shall accept remote power from a DTP3-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
10. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  3. Shall provide visual indication of signal presence on front of wallplate
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI, KCC
    3. Appropriate requirements of RoHS and WEEE
    4. UL-rated for use in plenum airspaces; meets UL 2043 for heat and smoke release, excluding the power supply
  5. Shall provide at least three (3) years parts and labor warranty
11. Approved device shall be the Extron DTP3 T 322 D, white (60-2066-53); no alternates or equals

DTP3 T 322 D - White

Provide a wallplate twisted pair transmitter that shall support the distribution of HDMI and USB-C video with data over a shielded CAT 6A cable
1. Two-gang decorator-style wallplate transmitter for the extension of HDMI and USB-C video with data
2. Video input requirements
  1. Shall provide one (1) HDMI input for digital video signals
    1. Shall support HDMI 2.0 specifications including data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats
  2. Shall provide one (1) USB-C input for digital video signals
    1. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall support RGB and YCbCr digital video formats
3. Audio input requirements
  1. Shall support embedded digital audio on HDMI and USB-C inputs
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data and extension requirements
  1. USB host connections
    1. One (1) USB-C
  2. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Power requirements
  1. Shall accept remote power from a DTP3-enabled product
  2. Shall accept local power
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
10. General requirements
  1. Shall include a USB-C configuration port on the front panel for data access and firmware updates
  2. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  3. Shall provide visual indication of signal presence on front of wallplate
  4. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI, KCC
    3. Appropriate requirements of RoHS and WEEE
    4. UL-rated for use in plenum airspaces; meets UL 2043 for heat and smoke release, excluding the power supply
  5. Shall provide at least three (3) years parts and labor warranty
11. Approved device shall be the Extron DTP3 T 322 D, white (60-2066-53); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

DTP3 T 322 D -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

DTP3 T 322 D

Transmisor DTP3 4K/60 de dos entradas para HDMI y USB‑C con datos – Placa mural de estilo Decorator

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.