Página principal de Productos
DTP Systems
Transmisores
Transmisores DTP3 Transmisores DTP2 HDMI - Transmisores de la serie 230 HDMI - Transmisores de la serie 330 DVI - Transmisores de la serie 230 DVI - Transmisores de la serie 330 DisplayPort - Transmisores de la serie 230 DisplayPort - Transmisores de la serie 330 Transmisores multiformato Receptores DTP3 Receivers Receptores DTP2 HDMI - Receptores de la serie 230 HDMI - Receptores de la serie 330 DVI - Receptores de la serie 330 DisplayPort - Receptores de la serie 230 DisplayPort - Receptores de la serie 330 Amplificadores de distribución Conmutadores Conmutadores con DTP Transmisores conmutadores DTP Escaladores y procesadores de señal Matrices de conmutación Cables y accesorios DTP Cables de par trenzado digital Conectores RJ-45 blindados Herramientas de terminación de crimpado Conectividad arquitectónica
DTP3 T 321
DTP3 T 101 D DTP3 T 202 DTP3 T 202 EU/MK DTP3 T 203 DTP3 T 211 DTP3 T 212 D DTP3 T 301 DTP3 T 321 DTP3 T 322 D DTP3 T 331

Twitter Copy Link

Imprimir

Nuevo Profesional

DTP3 T 321

Transmisor DTP3 USB-C 4K/60 con suministro de alimentación y datos

Características principales

Transmite vídeo con audio embebido, datos USB, alimentación y control hasta 100 m (330 ft) a través de un cable blindado CAT 6A
Soporta resoluciones de vídeo hasta 4K/60, incluyendo 5K
Conecta fuentes USB‑C^® que soportan modo alternativo DisplayPort
Proporciona alimentación para cargar la fuente USB‑C
Conexión host USB‑C
Dos conexiones de dispositivos USB locales
Todas las características

Previous Next

Se recomienda encarecidamente el cable XTP DTP 22 de par trenzado blindado de Extron

Galería de imágenes

Visión general interactiva

Vídeos destacados

Selector de DTP

Descripciones para consultores

Calculador de tasas de datos 8K

Nota: el DTP3 T 321 no es compatible con el DTP3 R 301 para la extensión de datos USB.

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El DTP3 T 321 es un transmisor de par trenzado digital de larga distancia para el envío de señales de vídeo USB‑C, audio embebido, datos USB, alimentación y RS‑232 bidireccional hasta 100 m (330 ft) a través de un cable CAT 6A blindado. Proporciona una entrada USB‑C, una salida HDMI local y dos puertos de dispositivos USB. El transmisor admite señales de vídeo a resoluciones hasta 4K/60 con muestreo de color 4:4:4, EDID Minder^® y HDCP 2.3. Para una máxima calidad de imagen y mínima latencia, todas las resoluciones de vídeo son transportadas sin compresión. El DTP3 T 321 incorpora carga de dispositivos USB-C de 60 W y admite un suministro de alimentación de hasta 100 W cuando se utiliza con el inyector de alimentación UPI 100 de Extron. Las conexiones locales de host y dispositivo que admiten datos USB de 10 Gbps y alimentación remota para receptores DTP3 facilitan la integración en entornos profesionales exigentes.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

DTP3 T 321

P/2 DA2xi

MediaLink for iPad

DTP3 T 321

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

DTP3 T 321

Provide a twisted pair transmitter that shall support the distribution of USB-C® video, data, embedded audio. and control over a shielded CAT 6A cable
1. Rack-mountable transmitter for the extension of USB-C video, data, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input
  2. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall provide one (1) HDMI buffered input loop-through for local monitor support or system expansion
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data requirements
  1. USB host connection
    1. One (1) USB-C, shared with video input
    2. Shall support data transfer rates up to 10 Gbps
  2. USB device connections
    1. Two (2) USB type A
    2. Shall support transfer rates up to 10 Gbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  2. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
10. Power requirements
  1. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  2. Shall support USB-C device charging up to 60 watts
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
11. General requirements
  1. Shall include a USB-C configuration port on the front panel for configuration access and firmware updates
  2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  3. Shall provide visual indication of RJ-45 signal and link status for DTP port
  4. Shall provide visual indication for signal presence, USB device, and USB-C power delivery status on front panel
  5. Shall provide Extron LockIt® Plus cable lacing brackets
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  7. Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 321(60-2017-52); no alternates or equals

DTP3 T 321

Provide a twisted pair transmitter that shall support the distribution of USB-C® video, data, embedded audio. and control over a shielded CAT 6A cable
1. Rack-mountable transmitter for the extension of USB-C video, data, and control
2. Video input requirements
  1. Shall provide one (1) USB-C input
  2. Shall support USB-C sources with DisplayPort Alt Mode
  3. Shall support digital video resolutions up to 4K/60 @ 4:4:4 color sampling
  4. Shall provide one (1) HDMI buffered input loop-through for local monitor support or system expansion
3. Audio input requirements
  1. Shall support embedded digital audio on USB-C input
  2. Shall support multiple embedded audio formats
  3. Shall support embedded HD lossless audio formats
4. Video output requirements
  1. Shall provide one (1) RJ-45 for connection to an Extron DTP3-enabled product
  2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 signals to an HDBaseT™-enabled display
5. USB data requirements
  1. USB host connection
    1. One (1) USB-C, shared with video input
    2. Shall support data transfer rates up to 10 Gbps
  2. USB device connections
    1. Two (2) USB type A
    2. Shall support transfer rates up to 10 Gbps
  3. USB extension requirements
    1. Shall support access to USB devices attached to a remote receiver connected to the DTP3 output
    2. Shall support transfer rates up to 480 Mbps
6. Transmission requirements
  1. Shall be compatible with CAT 6A shielded twisted pair cable, and Extron XTP DTP 22 shielded twisted pair cable
  2. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CAT 6A cable
7. EDID requirements
  1. Shall provide automatic EDID management between connected devices
    1. Provide a set of pre-stored EDID files
    2. Support capture of EDID from any connected display
    3. Support user uploading of custom-generated EDID files
    4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
8. HDCP requirements
  1. Shall be HDCP 2.3 compliant with backward compatibility for earlier HDCP versions
9. Control/Remote – RS-232 pass-through over shielded CAT 6A requirements
  1. Shall provide connection for AV device control
    1. One (1) 3-pole captive screw: RS-232 pass-through over DTP
10. Power requirements
  1. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
  2. Shall support USB-C device charging up to 60 watts
  3. Shall provide DIP switch on front panel for selection to provide power to a connected DTP3 receiver
  4. Shall support USB-C device charging up to 100 watts when connected to Extron UPI 100 power injector
11. General requirements
  1. Shall include a USB-C configuration port on the front panel for configuration access and firmware updates
  2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
  3. Shall provide visual indication of RJ-45 signal and link status for DTP port
  4. Shall provide visual indication for signal presence, USB device, and USB-C power delivery status on front panel
  5. Shall provide Extron LockIt® Plus cable lacing brackets
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS and WEEE
  7. Shall provide at least three (3) years parts and labor warranty
Approved device shall be the Extron DTP3 T 321(60-2017-52); no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

DTP3 T 321 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

DTP3 T 321

Transmisor DTP3 USB-C 4K/60 con suministro de alimentación y datos

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.