Página principal de Productos
Altavoces
Sound Bar
Altavoces de columna Altavoces de techo Flat Field Altavoces de techo Altavoces colgantes Altavoces de montaje en superficie Montaje y accesorios de altavoces Altavoces PoE Subwoofers
SB 33 A

Twitter Copy Link

Imprimir

Profesional

SB 33 A

Barra de sonido de ancho ajustable

Características principales

Proporciona una calidad de audio mejorada para espacios de colaboración
Seis modelos de ancho ajustable disponibles
Configurable para una cámara Web interna, una cámara PTZ, o sin cámara
Recintos acústicos de 76 mm (3 in) y rango completo con un puerto ajustado para la extensión de graves
Rango de frecuencia: 100 Hz a 20 kHz
Amplificador de clase D interno de Extron que cumple con el nivel 3 Ecofficient^®
Todas las características

SB 33 A<br>Adjustable Width Powered Sound Bar<br>Camera not included

SB 33 A<br>Shown with optional SAK BCG SB 33 Blank Center Grille

SB 33 A 55-65<br>Shown with optional SAK PTZ SB 33, PTZ shelf,<br>and optional SAK BCG SB 33, Blank Center Grille

SB 33 A<br>Shown with optional SAK PTZ SB 33, PTZ shelf,<br>and optional SAK BCG SB 33, Blank Center Grille<br>Camera not included

SB 33 A<br>Adjustable Width Sound Bar<br>Camera not included

SB 33 A 55-65 Shown with optional SMK V SB 33 VESA Mounting Kit<br>Camera not included

SB 33 A Shown with optional SMK V SB 33 Plus VESA Mounting Kit and Display
<br/> Camera not included

Cutaway view of power amp and connections

Transparent view of SB 33 A, showing power amp, power supply, and connections<br>Camera not included

Previous Next

Galería de imágenes

Visión general interactiva

AutoDesk Revit

Vídeos destacados

Selector de altavoces

Descripciones para consultores

Casos de éxito

Compatibilidad con cámaras Web

Los altavoces SB 33 A se presupuestan y venden individualmente

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

La SB 33 A de Extron es la primera barra de sonido de ancho ajustable de la industria para mejorar la experiencia de audio en espacios de colaboración. Cuenta con dos altavoces de 3" (76 mm) y rango completo con un puerto sintonizado, los cuales funcionan gracias a un amplificador de clase D Extron de nivel 3 Ecofficient. Esta barra de sonido está diseñada para su montaje bajo un dispositivo de visualización y dispone de una característica innovadora: el ancho ajustable, que permite adaptarla al ancho exacto del dispositivo con el fin de ofrecer un aspecto personalizado. Su panel central acepta una cámara Web interna y puede configurarse para cámaras PTZ utilizando una bandeja opcional. También está disponible una rejilla central ciega opcional para aplicaciones en las que no se requiere una cámara. La SB 33 A es compatible con los controladores de volumen y silenciado de la serie VCM. Además, se instala en un soporte mural incluido o en un kit de montaje VESA opcional para su uso con montajes de dispositivos de visualización.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

SB 33 A

IPL EXP 200

Serie USBA-C ProMax plenum

Serie USB PowerPlate 300

TLCA 1

SB 33 A

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

SB 33 A

Provide a powered, adjustable-width, wall-mountable stereo sound bar, that shall accommodate internal mounting of a webcam and options for PTZ camera mounting, use with no camera, and VESA mounting
1. Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
  1. Internal Driver Requirements
    1. Shall consist of two 3” (76.2 mm) full-range, paper cone drivers
  2. Internal Amplifier Requirements
    1. Input Requirements
      1. Shall support one stereo, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector with a maximum level of +12 dBu (balanced) at 1% THD+N
      2. Shall support one stereo, unbalanced signal on one pair of RCA connectors with a maximum level of +7 dBu at 1% THD+N
      3. Shall support one stereo, unbalanced signal on one 3.5 mm mini jack (tip, ring, sleeve) with a maximum level of +7 dBu at 1% THD+N
      4. Shall have an input impedance of >10k ohms unbalanced/balanced, DC coupled
      5. Shall have a balanced input sensitivity of -8 dBu
      6. Shall have an unbalanced input sensitivity of -16 dBV
    2. Output Requirements
      1. Shall provide a signal-to-noise ratio of >90 dB, at maximum output (15 dBu), balanced (unweighted)
    3. Amplifier Requirements
      1. Shall utilize an efficient Class D amplifier design
      2. Shall provide Class D Ripple Suppression technology
      3. Shall be convection cooled and operate without fans
      4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
      5. Shall provide a level adjustment
      6. Shall provide a bass adjustment of +/- 10 dB at 80 Hz
      7. Shall provide a treble adjustment of +/- 10 dB at 10 kHz
    4. Power Requirements
      1. Shall be Ecofficient Level 3 qualified
      2. Shall draw 9.1 watts during 1/8 power operation with both output channels driven
      3. Shall draw 3.7 watts during quiescent operation
      4. Shall provide a low power standby mode
Shall enter standby mode after 25 minutes of inactivity (+/- 5 minutes)
Shall draw less than 1 watt while in standby mode
Shall return to full power status in less than one second upon signal detection while in standby mode
Shall feature an input signal detection threshold of -55 dBV, +/- 3 dB on unbalanced RCA and 3.5 mm stereo mini jack inputs to deactivate standby mode
Shall feature an input signal detection threshold of -46 dBu, +/- 3 dB on balanced captive screw connector input to deactivate standby mode
1. Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
  1. Audio Requirements
    1. Shall provide a frequency range of 100 Hz to 20 kHz, -10dB, full space (per IEC 60268-5) when the bass and treble adjustments are set to their 12 o’clock positions
    2. Shall provide a calculated maximum SPL of 95 dB at 1 meter
    3. Shall provide nominal coverage angles
      1. Horizontal: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
      2. Vertical: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
  2. Control Requirements
    1. Shall support remote control of volume and muting on one 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
  3. Enclosure Requirements
    1. Shall consist of a metal, rectangular enclosure with metal grille
    2. Shall have a black finish
  4. Mounting Requirements
    1. Shall include a wall bracket for horizontal flush with wall installation
      1. Wall bracket shall include a bubble level
      2. Wall bracket shall have a black finish to match sound bar
  5. General Requirements
    1. Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
      1. For 46 inch to 55 inch displays
      2. For 55 inch to 65 inch displays
      3. For 65 inch to 70 inch displays
      4. For 75 inch to 80 inch displays
      5. For 82 inch to 90 inch displays
      6. For 90 inch to 100 inch displays
    2. Shall provide a 9 inch range of width adjustability
    3. Shall measure 6” (15.3 cm) in height
    4. Shall protrude no more than 4.0” (10.2 cm) into environment from mounting surface
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits
    5. Shall support use of an optional VESA mounting kit
      1. Approved optional VESA mounting kit for 46 inch to 80 inch displays shall be the Extron SMK V SB 33 Plus, part number 70-1192-02, no alternatives or equals
      2. Approved optional VESA mounting kit for 82 inch to 100 inch displays shall be the Extron SMK V SB 33 82-100, part number 70-1192-03, no alternatives or equals
    6. Shall support use of an optional shelf for mounting a PTZ camera
      1. Approved optional shelf for mounting a PTZ camera shall be the Extron SAK PTZ SB 33, part number 70-1260-01, no alternatives or equals
    7. Shall support use of an optional blank center grille
      1. Approved optional blank center grille shall be the Extron SAK BCG SB 33, part number 70-1229-01, no alternatives or equals
    8. Shall meet regulatory compliances: CE, CEC, CISPR 22 Class B, C-tick, European Code of Conduct, FCC Class B, ICES, RoHS, UL, CUL, VCCI Class B
    9. Shall provide a five year parts and labor product warranty
    10. Shall provide a seven year parts and labor Everlast power supply warranty
2. Approved device shall be the Extron SB 33 A, part numbers 60-1737-11, 60-1737-12, 60-1737-13, 60-1737-14, 60-1737-15, 60-1737-16; no alternatives or equals

SB 33 A

Provide a powered, adjustable-width, wall-mountable stereo sound bar, that shall accommodate internal mounting of a webcam and options for PTZ camera mounting, use with no camera, and VESA mounting
1. Adjustable-width, powered sound bar with two full-range speakers, internal amplifier, internal webcam mount, and included wall bracket.
  1. Internal Driver Requirements
    1. Shall consist of two 3” (76.2 mm) full-range, paper cone drivers
  2. Internal Amplifier Requirements
    1. Input Requirements
      1. Shall support one stereo, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector with a maximum level of +12 dBu (balanced) at 1% THD+N
      2. Shall support one stereo, unbalanced signal on one pair of RCA connectors with a maximum level of +7 dBu at 1% THD+N
      3. Shall support one stereo, unbalanced signal on one 3.5 mm mini jack (tip, ring, sleeve) with a maximum level of +7 dBu at 1% THD+N
      4. Shall have an input impedance of >10k ohms unbalanced/balanced, DC coupled
      5. Shall have a balanced input sensitivity of -8 dBu
      6. Shall have an unbalanced input sensitivity of -16 dBV
    2. Output Requirements
      1. Shall provide a signal-to-noise ratio of >90 dB, at maximum output (15 dBu), balanced (unweighted)
    3. Amplifier Requirements
      1. Shall utilize an efficient Class D amplifier design
      2. Shall provide Class D Ripple Suppression technology
      3. Shall be convection cooled and operate without fans
      4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
      5. Shall provide a level adjustment
      6. Shall provide a bass adjustment of +/- 10 dB at 80 Hz
      7. Shall provide a treble adjustment of +/- 10 dB at 10 kHz
    4. Power Requirements
      1. Shall be Ecofficient Level 3 qualified
      2. Shall draw 9.1 watts during 1/8 power operation with both output channels driven
      3. Shall draw 3.7 watts during quiescent operation
      4. Shall provide a low power standby mode
Shall enter standby mode after 25 minutes of inactivity (+/- 5 minutes)
Shall draw less than 1 watt while in standby mode
Shall return to full power status in less than one second upon signal detection while in standby mode
Shall feature an input signal detection threshold of -55 dBV, +/- 3 dB on unbalanced RCA and 3.5 mm stereo mini jack inputs to deactivate standby mode
Shall feature an input signal detection threshold of -46 dBu, +/- 3 dB on balanced captive screw connector input to deactivate standby mode
1. Shall provide an internal Everlast power supply that accepts 100 to 240 VAC, 50 to 60 Hz, 4.2 A
  1. Audio Requirements
    1. Shall provide a frequency range of 100 Hz to 20 kHz, -10dB, full space (per IEC 60268-5) when the bass and treble adjustments are set to their 12 o’clock positions
    2. Shall provide a calculated maximum SPL of 95 dB at 1 meter
    3. Shall provide nominal coverage angles
      1. Horizontal: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
      2. Vertical: 130° (1 kHz-4 kHz, weighted 2 kHz-4 kHz)
  2. Control Requirements
    1. Shall support remote control of volume and muting on one 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
  3. Enclosure Requirements
    1. Shall consist of a metal, rectangular enclosure with metal grille
    2. Shall have a black finish
  4. Mounting Requirements
    1. Shall include a wall bracket for horizontal flush with wall installation
      1. Wall bracket shall include a bubble level
      2. Wall bracket shall have a black finish to match sound bar
  5. General Requirements
    1. Shall be offered in six different widths, each with a range of adjustability defined by a supported diagonal display size
      1. For 46 inch to 55 inch displays
      2. For 55 inch to 65 inch displays
      3. For 65 inch to 70 inch displays
      4. For 75 inch to 80 inch displays
      5. For 82 inch to 90 inch displays
      6. For 90 inch to 100 inch displays
    2. Shall provide a 9 inch range of width adjustability
    3. Shall measure 6” (15.3 cm) in height
    4. Shall protrude no more than 4.0” (10.2 cm) into environment from mounting surface
      1. Shall comply with ADA – Americans with Disabilities Act standards for protruding object limits
    5. Shall support use of an optional VESA mounting kit
      1. Approved optional VESA mounting kit for 46 inch to 80 inch displays shall be the Extron SMK V SB 33 Plus, part number 70-1192-02, no alternatives or equals
      2. Approved optional VESA mounting kit for 82 inch to 100 inch displays shall be the Extron SMK V SB 33 82-100, part number 70-1192-03, no alternatives or equals
    6. Shall support use of an optional shelf for mounting a PTZ camera
      1. Approved optional shelf for mounting a PTZ camera shall be the Extron SAK PTZ SB 33, part number 70-1260-01, no alternatives or equals
    7. Shall support use of an optional blank center grille
      1. Approved optional blank center grille shall be the Extron SAK BCG SB 33, part number 70-1229-01, no alternatives or equals
    8. Shall meet regulatory compliances: CE, CEC, CISPR 22 Class B, C-tick, European Code of Conduct, FCC Class B, ICES, RoHS, UL, CUL, VCCI Class B
    9. Shall provide a five year parts and labor product warranty
    10. Shall provide a seven year parts and labor Everlast power supply warranty
2. Approved device shall be the Extron SB 33 A, part numbers 60-1737-11, 60-1737-12, 60-1737-13, 60-1737-14, 60-1737-15, 60-1737-16; no alternatives or equals

DAC 102

Provide a digital to analog audio converter that shall support two digital audio input channels and two analog audio output channels.
1. Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
  1. Input Requirements
    1. Shall support two uncompressed PCM digital audio signals on coaxial and TOSLINK connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
  3. Control Requirements
    1. Shall support remote control of volume and muting on 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
  4. Front Panel Requirements
    1. Shall provide a green LED for power indication
    2. Shall provide a TOSLINK connector for S/PDIF digital audio input
    3. Shall provide a green LED for TOSLINK signal present indication
    4. Shall provide a coaxial connector for S/PDIF digital audio input
    5. Shall provide a green LED for coaxial signal present indication
  5. Rear Panel Requirements
    1. Shall provide a female USB mini type B port for software control and power
    2. Shall provide two analog audio outputs on one 5-pole, 3.5 mm captive screw connector
    3. Shall provide remote volume and mute control port on one 3-pole, 3.5 mm captive screw connector
  6. General Requirements
    1. Shall support 5 VDC power on a USB mini type B port from an external power source
    2. Shall include an Extron ZipClip™ 25 mounting bracket
    3. Shall meet regulatory compliances
      1. CE, C-tick, FCC Class B, ICES, VCCI, RoHS, WEEE
    4. Shall provide a three year parts and labor warranty
2. Approved device shall be the Extron DAC 102, part number 60-1811-01; no alternates or equals.

DAC 102

Provide a digital to analog audio converter that shall support two digital audio input channels and two analog audio output channels.
1. Two channel digital to analog audio converter with coaxial and TOSLINK S/PDIF digital audio inputs and balanced and unbalanced analog audio outputs
  1. Input Requirements
    1. Shall support two uncompressed PCM digital audio signals on coaxial and TOSLINK connectors
  2. Output Requirements
    1. Shall support two balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
  3. Control Requirements
    1. Shall support remote control of volume and muting on 3-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
  4. Front Panel Requirements
    1. Shall provide a green LED for power indication
    2. Shall provide a TOSLINK connector for S/PDIF digital audio input
    3. Shall provide a green LED for TOSLINK signal present indication
    4. Shall provide a coaxial connector for S/PDIF digital audio input
    5. Shall provide a green LED for coaxial signal present indication
  5. Rear Panel Requirements
    1. Shall provide a female USB mini type B port for software control and power
    2. Shall provide two analog audio outputs on one 5-pole, 3.5 mm captive screw connector
    3. Shall provide remote volume and mute control port on one 3-pole, 3.5 mm captive screw connector
  6. General Requirements
    1. Shall support 5 VDC power on a USB mini type B port from an external power source
    2. Shall include an Extron ZipClip™ 25 mounting bracket
    3. Shall meet regulatory compliances
      1. CE, C-tick, FCC Class B, ICES, VCCI, RoHS, WEEE
    4. Shall provide a three year parts and labor warranty
2. Approved device shall be the Extron DAC 102, part number 60-1811-01; no alternates or equals.

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

SB 33 A -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

SB 33 A

Barra de sonido de ancho ajustable

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.