Página principal de Productos
Cables y adaptadores
Cables de par trenzado digital
Cables de control y AV Cables certificados para AVEdge, Cable Cubby y HSA Cables de fibra óptica Cables y adaptadores USB Cables BNC a BNC Mini alta resolución Cables VGA a VGA Cables VGA Cables VGA con audio Cables VGA micro HR Cables VGA micro HR con audio Cables de vídeo y audio Cables de audio Cables VGA a BNC (SY VGA) Cables SY VGA macho a cinco BNC hembra Cables SY VGA macho a cinco BNC macho Cables SY VGA hembra a cinco BNC hembra Cables de control y comunicaciones Cables RS-232 Cables y adaptadores de control Cables de aplicaciones especiales Cables de configuración Adaptadores de audio, vídeo y control Adaptadores de audio Adaptadores de S-Video Adaptadores de VGA Cambiadores de género Adaptadores de DisplayPort, DVI y HDMI Adaptadores USB Cables y adaptadores DisplayPort Cables y adaptadores HDMI Cables y adaptadores DVI Cables analógicos de alta resolución
Serie XTP DTP 22P
Serie XTP DTP 22 Serie XTP DTP 22P Serie XTP DTP 24 Serie XTP DTP 24P

Twitter Copy Link

Imprimir

Profesional

Serie XTP DTP 22P

Cables de par trenzado blindado con terminación de precisión para XTP Systems y DTP Systems - Plenum

Características principales

Entrega vídeo 4K/60 sin compresión DTP3 a 4:4:4
Diseñado para un rendimiento superior con los XTP Systems^® y los DTP^® Systems de Extron
Proporciona protección adicional contra las interferencias externas y asegura la alta calidad de transmisión de la señal
Diseñado para garantizar la integridad de la señal HDMI 2.0b sin comprimir
Diseño S/FTP con cuatro conductores de par trenzado blindados dentro de un blindaje mallado
Cable plenum clasificado NEC CMP
Todas las características

Galería de imágenes

Descripciones para consultores

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Diagrama de cableado
Descargas

Visión global

Los cables de la serie XTP DTP 22P de Extron son cables plenum de par trenzado blindado con terminación de precisión que optimizan la transmisión de la señal de alta velocidad y facilitan el cableado de los XTP Systems^® y los sistemas DTP^®. Los cables son terminados en fábrica con conectores RJ‑45 XTP DTP 22 y disponen de alivios de tensión moldeados. Diseñados para cumplir con las crecientes capacidades de rendimiento de DTP3, los cables han sido construidos con cable XTP DTP 22P de Extron, asegurando la integridad de la señal de vídeo 4K/60 4:4:4 sin comprimir a distancias de hasta 100 m (330 ft).

Vídeo

Descripción

Especificaciones

Diagrama

Diagrama de cableado

Descargas

Productos vistos recientemente

Serie XTP DTP 22P

MTP T 15HD RS

Kit de montaje en techo

Sistema WindoWall®

VCM 100 MAAP

FOX3 T 101

IN9456

VCM 200 MK

ISM 824

MTPX 3216

AAP 301

MTP RL 15HD A & MTP RL 15HD A SEQ

Serie XTP DTP 22P

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

XTP DTP 22P/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/35, part number 26-740-35; no alternates or equals

XTP DTP 22P/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/35, part number 26-740-35; no alternates or equals

XTP DTP 22P/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/50, part number 26-740-50; no alternates or equals

XTP DTP 22P/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/50, part number 26-740-50; no alternates or equals

XTP DTP 22P/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/75, part number 26-740-75; no alternates or equals

XTP DTP 22P/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/75, part number 26-740-75; no alternates or equals

XTP DTP 22P/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/100, part number 26-740-100; no alternates or equals

XTP DTP 22P/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 and CMP 910
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22P/100, part number 26-740-100; no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

Serie XTP DTP 22P -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

Serie XTP DTP 22P

Cables de par trenzado blindado con terminación de precisión para XTP Systems y DTP Systems - Plenum

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.