Página principal de Productos
DTP Systems
Cables y accesorios DTP
Cables de par trenzado digital Conectores RJ-45 blindados Herramientas de terminación de crimpado Conectividad arquitectónica Transmisores Transmisores DTP3 Transmisores DTP2 HDMI - Transmisores de la serie 230 HDMI - Transmisores de la serie 330 DVI - Transmisores de la serie 230 DVI - Transmisores de la serie 330 DisplayPort - Transmisores de la serie 230 DisplayPort - Transmisores de la serie 330 Transmisores multiformato Receptores DTP3 Receivers Receptores DTP2 HDMI - Receptores de la serie 230 HDMI - Receptores de la serie 330 DVI - Receptores de la serie 330 DisplayPort - Receptores de la serie 230 DisplayPort - Receptores de la serie 330 Amplificadores de distribución Conmutadores Conmutadores con DTP Transmisores conmutadores DTP Escaladores y procesadores de señal Matrices de conmutación
Serie XTP DTP 22
Serie XTP DTP 22 Serie XTP DTP 22P Serie XTP DTP 24 Serie XTP DTP 24P XTP DTP 22 XTP DTP 24

Twitter Copy Link

Imprimir

Profesional

Serie XTP DTP 22

Cables de par trenzado blindado con terminación de precisión para XTP Systems y DTP Systems

Características principales

Entrega vídeo 4K/60 sin compresión DTP3 a 4:4:4 para distancias de hasta 100 m (330 ft)
Diseñado para un rendimiento superior con los XTP Systems^® y los sistemas DTP^® de Extron
Proporciona protección adicional contra las interferencias externas y asegura la alta calidad de transmisión de la señal
Diseñado para garantizar la integridad de la señal HDMI 2.0b sin comprimir
Diseño S/FTP con cuatro conductores de par trenzado blindados dentro de un blindaje mallado
Fabricados con conductor de cobre sólido de 22 AWG
Todas las características

Galería de imágenes

Descripciones para consultores

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

Los cables de la serie XTP DTP 22 de Extron son cables de par trenzado blindado con terminación de precisión que optimizan la transmisión de la señal de alta velocidad dentro de los sistemas DTP^® y los XTP Systems^® de Extron. Los cables son terminados en fábrica con conectores RJ‑45 XTP DTP 22 y disponen de alivios de tensión moldeados. Diseñado para cumplir con las crecientes capacidades de rendimiento de DTP3, los cables han sido construidos con cable XTP DTP 22 de Extron, asegurando la integridad de la señal de vídeo 4K/60 sin comprimir a 4:4:4 a distancias de hasta 100 m (330 ft).

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

Serie XTP DTP 22

DTP CrossPoint 82 4K

Serie XTP DTP 22

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

XTP DTP 22/3

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/3, part number 26-739-03; no alternates or equals

XTP DTP 22/3

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/3, part number 26-739-03; no alternates or equals

XTP DTP 22/6

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/6, part number 26-739-06; no alternates or equals

XTP DTP 22/6

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/6, part number 26-739-06; no alternates or equals

XTP DTP 22/9

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/9, part number 26-739-09; no alternates or equals

XTP DTP 22/9

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/9, part number 26-739-09; no alternates or equals

XTP DTP 22/12

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/12, part number 26-739-12; no alternates or equals

XTP DTP 22/12

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/12, part number 26-739-12; no alternates or equals

XTP DTP 22/25

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/25, part number 26-739-25; no alternates or equals

XTP DTP 22/25

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/25, part number 26-739-25; no alternates or equals

XTP DTP 22/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/35, part number 26-739-35; no alternates or equals

XTP DTP 22/35

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/35, part number 26-739-35; no alternates or equals

XTP DTP 22/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/50, part number 26-739-50; no alternates or equals

XTP DTP 22/50

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/50, part number 26-739-50; no alternates or equals

XTP DTP 22/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/75, part number 26-739-75; no alternates or equals

XTP DTP 22/75

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/75, part number 26-739-75; no alternates or equals

XTP DTP 22/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/100, part number 26-739-100; no alternates or equals

XTP DTP 22/100

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/100, part number 26-739-100; no alternates or equals

XTP DTP 22/125

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/125, part number 26-739-125; no alternates or equals

XTP DTP 22/125

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/125, part number 26-739-125; no alternates or equals

XTP DTP 22/150

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/150, part number 26-739-150; no alternates or equals

XTP DTP 22/150

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/150, part number 26-739-150; no alternates or equals

XTP DTP 22/175

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/175, part number 26-739-175; no alternates or equals

XTP DTP 22/175

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/175, part number 26-739-175; no alternates or equals

XTP DTP 22/200

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/200, part number 26-739-200; no alternates or equals

XTP DTP 22/200

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/200, part number 26-739-200; no alternates or equals

XTP DTP 22/300

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/300, part number 26-739-300; no alternates or equals

XTP DTP 22/300

Provide interconnection of digital video over twisted pair switching, distribution, and extension devices
1. Shielded twisted pair cable for digital video over twisted pair devices
  1. Cable shall be optimized for use in digital video over twisted pair applications
  2. Cable shall comply with the TIA/EIA T568B termination standard
  3. Cable shall be terminated with shielded CAT 6A RJ-45 plugs
  4. Cable shall ensure signal integrity for uncompressed HDMI 2.0b 4K/60 video at 4:4:4
  5. Cable shall support 500 MHz bandwidth
  6. Cable shall provide protection from outside electrical interference
  7. Cable shall utilize S/FTP construction
    1. An overall tinned copper braid with 40-percent coverage
    2. An overall aluminized Mylar shield
    3. Four shielded twisted pair conductors (eight individual conductors) of 22 AWG solid copper
  8. Nominal pair-to-pair skew shall be no less than 8 nanoseconds per 100 meters, and no more than 45 nanoseconds per 100 meters
  9. Cable shall comply with NEC – National Electrical Code Article 800 CM and UL 1685 standards at 75 degrees Celsius
2. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron XTP DTP 22/300, part number 26-739-300; no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

Serie XTP DTP 22 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

Serie XTP DTP 22

Cables de par trenzado blindado con terminación de precisión para XTP Systems y DTP Systems

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.