Página principal de Productos
Procesadores de control IP Link Pro xi
Serie de fuentes de alimentación IPL EXP
Serie IPCP Pro xi Controlador de alimentación IPCP Pro xi Serie de E/S IPL EXP Accesorios para IPCP Pro xi Serie IPCP Pro Accesorios IP Link Pro Controladores de alimentación IP Link Accesorios para IP Link Software Utilidades Drivers de dispositivos Firmware
IPL EXP PDU4H
IPL EXP PDU4H IPL EXP PDU8L

Twitter Copy Link

Imprimir

Profesional

IPL EXP PDU4H

Interfaz de expansión de alimentación de sistemas de control

Características principales

Proporciona una gestión a distancia de la alimentación para dispositivos AV
Cuatro salidas IEC hembra independientes de 100/240 V CA, 12/10 A máx.
Control remoto del encendido/apagado de las salidas de alimentación de CA individuales
Sensor de corriente agregada
Cuatro puertos de control manual
Funcionamiento independiente utilizando una API segura de Extron
Todas las características

Previous Next

Galería de imágenes

Visión general interactiva

Vídeos destacados

Premios

Ganador del premio Innovative Product 2022 de SVC
Premios AVNation Reader's Choice Awards 2021

Ayuda sobre productos

Descripciones para consultores

Casos de éxito

Videotutoriales de software

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

La IPL EXP PDU4H de Extron es una interfaz de expansión de la alimentación del sistema de control que proporciona una gestión de la alimentación centralizada para sistemas AV de tamaño pequeño a mediano. Proporciona la capacidad de controlar salidas de CA individuales a distancia y permite sensores de corriente agregada. La IPL EXP PDU4H dispone de Ethernet y cuenta con cuatro salidas de CA, cuatro puertos de control y un relé para soporte adicional del sistema. Ha sido diseñada para utilizarse con el procesador de control de la serie IPCP Pro xi y ofrecer así un control de la alimentación seguro y encriptado de los dispositivos conectados. También puede funcionar independientemente utilizando una API segura de Extron, permitiendo una integración perfecta para aplicaciones especializadas. La IPL EXP PDU4H se aloja en una compacta carcasa de 1U y medio ancho de rack que ofrece una amplia variedad de opciones de montaje.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

IPL EXP PDU4H

NBP 108 D

XPA U 1004C

IPL EXP PDU4H

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

IPL EXP PDU4H

Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
1. Ethernet enabled power expansion interface
  1. Device shall have four switched IEC-320-C13 female outlets located on the back of the enclosure that can be used for centralized power management of connected devices
  2. Provide four contact closure Manual Control inputs on captive screw connectors located on the back of the enclosure that can be used for manual control of the four switched AC outlets
  3. Provide a single 24V relay located on the back of the enclosure that can be used for providing an audible or visual notification to the end user
  4. Provide a single 12A circuit breaker button located on the back of the enclosure for over-current protection
  5. Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
  6. Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
  7. Provide front panel LED activity indicators for power status, reset status, switched outlet status, breaker status, and network status
  8. Device shall support the following protocols: DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
  10. Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
  11. Device shall include multiple, single-stage MOVs for providing up to 1,750 Joules of protection for attached devices
  12. Device shall support power up sequencing to prevent an in-rush power overload
  13. Device shall have at least 512 MB of nonvolatile memory
  14. Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
2. Mounting requirements
  1. Device shall be housed in a 1 RU, half rack width metal enclosure.
  2. Device shall be rack mountable using an optional rack shelf.
3. Software requirements
  1. The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively.
  2. Device drivers and modules can be obtained through Extron support resources and database.
  3. Shall be configured or programmed by an Extron authorized user.
  4. The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
  5. Device shall include an embedded default webpage allowing for simple standalone control of the switched AC outlets
  6. Device shall be able to operate independently using a secure Extron API
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
  2. Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
  3. Device shall provide the option to modify administrator and user credentials
  4. Device shall support security updates to maintain network health
  5. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  6. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  7. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. C-Tick
  3. c-UL
  4. FCC Class B
  5. ICES
  6. UL
  7. VCCI
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron IPL EXP PDU4H, part number 60-1956-01, no alternates or equals

IPL EXP PDU4H

Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
1. Ethernet enabled power expansion interface
  1. Device shall have four switched IEC-320-C13 female outlets located on the back of the enclosure that can be used for centralized power management of connected devices
  2. Provide four contact closure Manual Control inputs on captive screw connectors located on the back of the enclosure that can be used for manual control of the four switched AC outlets
  3. Provide a single 24V relay located on the back of the enclosure that can be used for providing an audible or visual notification to the end user
  4. Provide a single 12A circuit breaker button located on the back of the enclosure for over-current protection
  5. Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
  6. Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
  7. Provide front panel LED activity indicators for power status, reset status, switched outlet status, breaker status, and network status
  8. Device shall support the following protocols: DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
  10. Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
  11. Device shall include multiple, single-stage MOVs for providing up to 1,750 Joules of protection for attached devices
  12. Device shall support power up sequencing to prevent an in-rush power overload
  13. Device shall have at least 512 MB of nonvolatile memory
  14. Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
2. Mounting requirements
  1. Device shall be housed in a 1 RU, half rack width metal enclosure.
  2. Device shall be rack mountable using an optional rack shelf.
3. Software requirements
  1. The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively.
  2. Device drivers and modules can be obtained through Extron support resources and database.
  3. Shall be configured or programmed by an Extron authorized user.
  4. The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
  5. Device shall include an embedded default webpage allowing for simple standalone control of the switched AC outlets
  6. Device shall be able to operate independently using a secure Extron API
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
  2. Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
  3. Device shall provide the option to modify administrator and user credentials
  4. Device shall support security updates to maintain network health
  5. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  6. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  7. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. C-Tick
  3. c-UL
  4. FCC Class B
  5. ICES
  6. UL
  7. VCCI
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron IPL EXP PDU4H, part number 60-1956-01, no alternates or equals

IPL EXP PDU4H

Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
1. Ethernet enabled power expansion interface
  1. Device shall have four switched IEC-320-C13 female outlets located on the back of the enclosure that can be used for centralized power management of connected devices
  2. Provide four contact closure Manual Control inputs on captive screw connectors located on the back of the enclosure that can be used for manual control of the four switched AC outlets
  3. Provide a single 24V relay located on the back of the enclosure that can be used for providing an audible or visual notification to the end user
  4. Provide a single 12A circuit breaker button located on the back of the enclosure for over-current protection
  5. Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
  6. Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
  7. Provide front panel LED activity indicators for power status, reset status, switched outlet status, breaker status, and network status
  8. Device shall support the following protocols: DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
  10. Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
  11. Device shall include multiple, single-stage MOVs for providing up to 1,750 Joules of protection for attached devices
  12. Device shall support power up sequencing to prevent an in-rush power overload
  13. Device shall have at least 512 MB of nonvolatile memory
  14. Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
  15. Device shall include four one-foot cables allowing you to connect a power cord with a NEMA 5-15P plug into the IEC-320-C13 outlet of the PDU
2. Mounting requirements
  1. Device shall be housed in a 1 RU, half rack width metal enclosure.
  2. Device shall be rack mountable using an optional rack shelf.
3. Software requirements
  1. The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively.
  2. Device drivers and modules can be obtained through Extron support resources and database.
  3. Shall be configured or programmed by an Extron authorized user.
  4. The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
  5. Device shall include an embedded default webpage allowing for simple standalone control of the switched AC outlets
  6. Device shall be able to operate independently using a secure Extron API
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
  2. Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
  3. Device shall provide the option to modify administrator and user credentials
  4. Device shall support security updates to maintain network health
  5. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  6. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  7. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. C-Tick
  3. c-UL
  4. FCC Class B
  5. ICES
  6. UL
  7. VCCI
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron IPL EXP PDU4H, part number 60-1956-02, no alternates or equals

IPL EXP PDU4H

Provide an Ethernet-enabled power expansion interface for the purpose of remotely powering and monitoring connected AV equipment and AV systems.
1. Ethernet enabled power expansion interface
  1. Device shall have four switched IEC-320-C13 female outlets located on the back of the enclosure that can be used for centralized power management of connected devices
  2. Provide four contact closure Manual Control inputs on captive screw connectors located on the back of the enclosure that can be used for manual control of the four switched AC outlets
  3. Provide a single 24V relay located on the back of the enclosure that can be used for providing an audible or visual notification to the end user
  4. Provide a single 12A circuit breaker button located on the back of the enclosure for over-current protection
  5. Device shall have a female RJ-45 jack located on the back of the enclosure that allows for ethernet based control of the power expansion interface while supporting 10/100 Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the jack for troubleshooting network issues
  6. Device shall include a multi-function button located on the front of the enclosure that allows for the reset of the device or its communication properties at minimum
  7. Provide front panel LED activity indicators for power status, reset status, switched outlet status, breaker status, and network status
  8. Device shall support the following protocols: DHCP, DNS, HTTP (redirect), HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  9. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
  10. Device shall support aggregate current sensing for monitoring of power consumption that can be used for reporting and troubleshooting purposes
  11. Device shall include multiple, single-stage MOVs for providing up to 1,750 Joules of protection for attached devices
  12. Device shall support power up sequencing to prevent an in-rush power overload
  13. Device shall have at least 512 MB of nonvolatile memory
  14. Device shall be equipped with an internal universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power.
  15. Device shall include four one-foot cables allowing you to connect a power cord with a NEMA 5-15P plug into the IEC-320-C13 outlet of the PDU
2. Mounting requirements
  1. Device shall be housed in a 1 RU, half rack width metal enclosure.
  2. Device shall be rack mountable using an optional rack shelf.
3. Software requirements
  1. The device may be configured or programmed using Extron’s Global Configurator Plus or Professional, or ControlScript Deployment Utility respectively.
  2. Device drivers and modules can be obtained through Extron support resources and database.
  3. Shall be configured or programmed by an Extron authorized user.
  4. The device’s configuration and settings shall be managed using either Extron’s Toolbelt software or via SIS-over-SSH
  5. Device shall include an embedded default webpage allowing for simple standalone control of the switched AC outlets
  6. Device shall be able to operate independently using a secure Extron API
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the control processor and the IPL EXP PDU
  2. Device shall support HTTPS for secure communication between the IPL EXP PDU and the embedded web pages
  3. Device shall provide the option to modify administrator and user credentials
  4. Device shall support security updates to maintain network health
  5. Device shall require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  6. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  7. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. C-Tick
  3. c-UL
  4. FCC Class B
  5. ICES
  6. UL
  7. VCCI
  8. RoHs
  9. WEEE
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron IPL EXP PDU4H, part number 60-1956-02, no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

IPL EXP PDU4H -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

IPL EXP PDU4H

Interfaz de expansión de alimentación de sistemas de control

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.