Página principal de Productos
Control y automatización
Controladores de automatización de espacios de trabajo
Apps Licencias LinkLicense de sistemas de control Drivers de dispositivos Productos eBUS Firmware GlobalViewer Enterprise Procesadores de control IP Link Pro xi Mandos a distancia IR y paneles de control Controladores MediaLink Plus Paneles de botones en red Software Pantallas táctiles TouchLink Pro Utilidades Control virtual
WC Pro 160
HD CTL 100 WC Pro 150 OCS WC Pro 160

Twitter Copy Link

Imprimir

Profesional

WC Pro 160

Controlador de automatización para espacios de trabajo con EDID Minder

Características principales

Funcionalidad nada más sacarlo de la caja que soporta el control de dispositivos de visualización a través de CEC desde un puerto HDMI
Soporta resoluciones de vídeo hasta 4K/60 a 4:4:4
EDID Minder^® que gestiona automáticamente la comunicación EDID entre los dispositivos conectados
Supervisión y control Ethernet
Página Web integrada que permite sencillas configuraciones y proporciona la elección de un método de control Ethernet, RS-232 o IR del encendido/apagado del dispositivo de visualización
LinkLicense para procesadores de control WC Pro que proporciona varias mejoras
Todas las características

Previous Next

Galería de imágenes

Visión general interactiva

Ayuda sobre productos

Descripciones para consultores

Activar una LinkLicense

Videotutoriales de software

Genera una Universal Access Key (clave de acceso universal)

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El WC Pro 160 de Extron es un compacto controlador de automatización para espacios de trabajo, que dispone de Ethernet, con EDID Minder diseñado para un control automatizado de dispositivos de visualización en espacios de trabajo de todos los tamaños. Nada más sacarlo de la caja, simplemente conecta una señal activa a la entrada HDMI y el dispositivo de visualización se enciende. Un sensor de ocupación opcional también puede utilizarse para encender el dispositivo de visualización cuando alguien entra en el espacio y se apaga cuando no detecta movimiento. Si se necesitan ajustes adicionales, la página Web integrada permite la configuración de un único dispositivo de visualización a través de Ethernet, RS‑232 o IR. El WC Pro 160 se aloja en una caja de metal compacta diseñada para ocultarse perfectamente detrás de un dispositivo de visualización o bajo una mesa.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

WC Pro 160

Fuente de alimentación de escritorio de la serie PS

Serie HDMI Ultra

MVGA-A M-M

DTP R HWP 4K 331 D

UTR 104

IPL EXP PDU4H

NBP 108 D

XPA U 1004C

WC Pro 160

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

WC Pro 160

Provide an automation device for display power control in small to medium sized workspaces
1. CEC enabled automation device for out of the box room display power automation
  1. Provide a 12-volt DC input on a captive screw connector located on the back of the device allowing for power of the device
  2. Provide a female HDMI input located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4
  3. Provide a female HDMI output located on the back of the device that supports computer and video resolutions up to 4K/60 @ 4:4:4 and features CEC control of the connected display if supported
  4. Provide a five-pole captive screw connector for de-embedded HDMI analog audio
  5. Device shall include a way to manage the EDID settings to ensure that the connected display shows the proper output regardless of the source used
  6. Provide a configurable RS-232 port on captive screw connectors located on the back of the device that can be configured for unidirectional or bidirectional control of AV system components
  7. Provide an IR port on captive screw connector located on the back of the device for auxiliary AV device control. This port shall allow the control of two devices using a dual IR emitter.
  8. Provide two digital I/O’s on a captive screw connector located on the back of the device that can be used to interface with devices such as sensors, switches, LEDs, and relays
  9. Provide a 24-volt DC output on a captive screw connector located on the back of the device that can be used to power auxiliary devices such as a room occupancy sensor
  10. Device shall have a female RJ-45 jack located on the back it that supports 10/100Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af
  11. Provide front panel LED activity indicators for power status, HDMI and HDCP signal presence, RS-232 status, IR status, digital I/O status, CEC status and network status
  12. Provide a multi-function button located on the front of the device that allows for resetting to its default configuration or to factory firmware defaults
  13. Device shall include Extron LockIt® HDMI cable lacing brackets
  14. Device shall support the addition of an Extron LinkLicense® for WC Control Processor
    1. Device shall support the use of TouchLink Pro touchpanels and Network Button Panels
  15. Device shall have at least 8 GB of nonvolatile memory.
  16. Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment.
  17. Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
  18. Device shall support the addition of an Extron LinkLicense® for user interfaces
2. Mounting requirements
  1. Device shall be housed in a one-inch high 3/8 rack width designed for placement behind a display, above a projector or under a table
  2. Device shall be rack mountable using an optional rack shelf
  3. Device shall be able to be installed under a table, desk, or other flat surface using an included mounting kit
3. Software requirements
  1. The device may be configured using Extron’s Global Configurator Plus or Professional once Extron Control for WC Control Processor is applied
  2. Display drivers can be obtained directly from the built-in webpage or through Extron support resources and database
  3. Shall be configured by an Extron authorized user
  4. The device’s configuration and settings shall be managed using Extron’s Toolbelt software
  5. The device's A/V settings and EDID shall be managed using Extron's PCS software
4. Security Requirements
  1. Device shall support SFTP and SSH for secure communication between the automation device and a TouchLink Pro touchpanel or Network Button Panel
  2. Device shall support HTTPS and SSH for secure communication between the automation device and Extron Control App
  3. Device shall support HTTPS for secure communication between the automation device and Extron Control for Web
  4. Device shall support SFTP and SSH for secure communication between the automation device and the configuration software
  5. Device shall provide the option to modify administrator and user credentials
  6. Device shall support security updates to maintain network health.
  7. Device shall require a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
  8. Device shall support the installation of an owner furnished certificate with the following properties:
    1. Certificates shall include x.509 support
    2. Certificates shall include public / private key exchange
    3. Certificates shall support PEM encoding
  9. Extron shall furnish documentation that describes all supported network ports and services
5. Shall meet regulatory compliances
  1. CE
  2. c-UL
  3. UL
  4. C-Tick
  5. FCC Class A
  6. ICES
  7. VCCI Class A
  8. RoHs
  9. WEEE
  10. Device shall be UL listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release
6. Product Warranty
  1. Shall provide at least 3 years parts and labor
7. Approved device shall be the Extron WC Pro 160, part number 60-1804-01, no alternates or equals

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

WC Pro 160 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

WC Pro 160

Controlador de automatización para espacios de trabajo con EDID Minder

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.