Página principal de Productos
Amplificadores de potencia
Amplificadores de potencia
Amplificadores de potencia en red Amplificador PoE
XPA U 758
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 4004 FX XPA U 758

Twitter Copy Link

Imprimir

Profesional

XPA U 758

Amplificador de ocho canales de baja impedancia
75 W por canal

Características principales

Potencia de salida de 75 W rms por canal a 8 Ω
Cumple con el nivel 3 Ecofficient^®
Modo standby automático que ahorra energía
InstaWake™ sale del modo de espera automático en menos de 100 ms
Funcionamiento de refrigeración por convección, sin ventilador; puede apilarse sin espacio adicional en el rack para la ventilación
Ocho canales en una carcasa de 1U y medio ancho de rack - accesorios de montaje en rack incluidos
Todas las características

XPA U 758 with Optional Flexible Conduit Adapter Kit (70-228-02)

Previous Next

Galería de imágenes

Visión general interactiva

Vídeos destacados

Comparar características

Descripciones para consultores

Selector de amplificador

Esta nueva herramienta le permite buscar modelos de amplificador según sus características

Calculadores de audio

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El XPA U 758 de Extron es un amplificador de potencia de audio de nivel 3 Ecofficient que ofrece ocho canales de 75 W en una carcasa de 1U, medio ancho de rack, con refrigeración por convección y clasificada plenum que incluye accesorios de montaje en rack. Este amplificador ofrece una potencia y densidad de canales sin precedentes, y permite instalar unidades sin utilizar espacio en el rack para la ventilación, conservando un valioso espacio. Dispone de un diseño de clase D avanzado y altamente eficiente con corrección del factor de potencia, corriente de inserción ultrabaja, modo de espera (standby) automático desbloqueable con activación rápida y nuestra tecnología patentada CDRS – supresión de rizado en clase D.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

XPA U 758

MLS 406

TMK 110 D

MAAP 100 HBL-LCFB

MIX 301

Serie DVI DA Plus

NAV E 201 D

XPA U 758

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

XPA U 758

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support eight analog inputs and eight amplified outputs with 75 watts rms per channel.
1. Compact stereo amplifier with 75 watts rms power output per channel and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support eight, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to adjacent odd/even input pairs for bridged output operation
  2. Output Requirements
    1. Shall support eight speaker level signals on four 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 75 watts rms per channel into 8 ohms measured at 1 kHz with 0.1% THD
    3. Shall provide 50 watts rms per channel into 4 ohms measured at 1 kHz with 0.1% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 72 watts during typical (1/8 power) operation with all output channels driven with 4 ohm loads
    2. Shall draw 96.7 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 9.6 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall meetin Ecofficient Level 3 requirements
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide eight inputs on four 5-pole, 3.5 mm captive screw connectors
    2. Shall provide eight outputs on four 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide green LEDs for input signal presence indication
    6. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 758, part number 60-1863-01; no alternates or equals.

XPA U 758

Provide a compact, energy efficient audio amplifier with low thermal dissipation that shall support eight analog inputs and eight amplified outputs with 75 watts rms per channel.
1. Compact stereo amplifier with 75 watts rms power output per channel and Ecofficient Level 3 qualification
  1. Input Requirements
    1. Shall support eight, balanced or unbalanced line level signals on four 5-pole, 3.5 mm captive screw connectors
    2. Shall support wiring of a mono source to adjacent odd/even input pairs for bridged output operation
  2. Output Requirements
    1. Shall support eight speaker level signals on four 4-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 75 watts rms per channel into 8 ohms measured at 1 kHz with 0.1% THD
    3. Shall provide 50 watts rms per channel into 4 ohms measured at 1 kHz with 0.1% THD
    4. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    5. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 8 ohms
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 72 watts during typical (1/8 power) operation with all output channels driven with 4 ohm loads
    2. Shall draw 96.7 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 9.6 watts during quiescent operation
    4. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall draw less than 1 watt while in standby mode
      3. Shall return to full power status in less than 100 milliseconds upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    5. Shall meetin Ecofficient Level 3 requirements
    6. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote standby control on one 2-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide eight inputs on four 5-pole, 3.5 mm captive screw connectors
    2. Shall provide eight outputs on four 4-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole, 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide green LEDs for input signal presence indication
    6. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under CE, CEC, CISPR 22 Class B, C-tick, CUL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, UL 2043, VCCI Class B
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor product warranty
    4. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 758, part number 60-1863-01; no alternates or equals.

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

XPA U 758 -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

XPA U 758

Amplificador de ocho canales de baja impedancia
75 W por canal

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.