Página principal de Productos
Amplificadores de potencia
Amplificadores de potencia
Amplificadores de potencia en red Amplificador PoE
XPA U 4004 FX
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 4004 FX XPA U 758

Twitter Copy Link

Imprimir

Profesional

XPA U 4004 FX

Amplificador de potencia de audio de salida configurable de cuatro canales
400 W por canal

Características principales

Cuatro canales de 400 W a 8 Ω, 4 Ω, 70 V o 100 V
Modo de salida configurable por canal
Distribución de potencia flexible para cumplir con los requisitos del sistema
InstaWake+™ sale del modo de espera automático en menos de 5 ms
ECO Standby entrega potencia sólo cuando se necesita, maximizando el ahorro de energía
Cumple con el nivel 4 Ecofficient^®
Todas las características

XPA U 4004 FX with Rear Rack Ears Attached

XPA U 4004 FX with Rear Rack Ear Maximum Depth

Previous Next

Galería de imágenes

Visión general interactiva

Vídeos destacados

Premios

Ganador SCN Installation Product 2025
Ganador del Pro AV Best in Market 2024 de Sound & Video Contractor
Ganador del premio SVC Innovative Product 2024

Reseña del producto

Descripciones para consultores

Selector de amplificador

Esta nueva herramienta le permite buscar modelos de amplificador según sus características

Visión global
Vídeo
Descripción
Especificaciones
Diagrama
Ilustraciones
Descargas

Visión global

El XPA U 4004 FX de Extron es un amplificador de potencia de audio de alto rendimiento y cuatro canales, de nivel 4 Ecofficient que puede proporcionar 400 W simultáneamente en cargas de 8 Ω, 4 Ω, 70 V y 100 V en sistemas con múltiples zonas. Los selectores giratorios en la parte trasera del panel hacen que sea rápido y fácil seleccionar independientemente un modo de salida por canal para dar potencia a cada zona. Este amplificador altamente eficiente incluye ECO Standby con InstaWake+ que maximiza de forma automática el tiempo de su estado de potencia más baja para que haya el mayor ahorro de energía posible. Para la máxima flexibilidad, la potencia total de dos canales de 400 W adyacentes es compartida, proporcionando hasta 800 W por canal, según los requisitos del sistema. La carcasa con refrigeración por ventilador no requiere espacios vacíos en el rack, e incluye accesorios de montaje para la parte delantera y trasera del rack que proporcionan estabilidad.

Vídeo

Descripción

Especificaciones

Diagrama

Ilustraciones

Descargas

Productos vistos recientemente

XPA U 4004 FX

CPM105AM

IN3666

XPA U 4004 FX

Descripciones para consultores

Seleccione un número de referencia:

Select a Part Number:

Copiar el texto Copiado Se ha producido un error. Inténtelo de nuevo más tarde.

XPA U 4004 FX

Provide an energy efficient audio amplifier with low thermal dissipation that shall support four analog inputs and four amplified outputs with 400 watts rms per channel into low or high impedance systems.
1. Audio power amplifier with 400 watts rms power output per channel and power sharing between adjacent odd/even channel pairs
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support four speaker level signals on four 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 400 watts rms per channel with all channels driven
    3. Shall provide 800 watts rms per channel with one channel driven per pair
    4. Shall support rear panel selection of individual channel output modes between 8 ohms, 4 ohms, or 70 volt or 100 volt operation
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    3. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    4. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 272 watts during typical (1/8 power) operation with all output channels equally driven with 4 ohm loads
    2. Shall draw 258 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 252 watts during typical (1/8 power) operation with all output channels driven in 70 volt mode
    4. Shall draw 245 watts during typical (1/8 power) operation with all output channels driven in 100 volt mode
    5. Shall draw 21.2 watts during quiescent operation
    6. Shall provide two low power standby modes
      1. By default, shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. When enabled, shall enter ECO Standby mode after less than 10 seconds of inactivity
      3. Shall draw less than 1 watt while in either standby mode
      4. Shall return to full power status in less than 5 milliseconds upon signal detection while in either standby mode
      5. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate either standby mode
    7. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
    8. Shall meet Ecofficient Level 4 requirements
  5. Control Requirements
    1. Shall support remote standby control on a 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on four 2-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor or ECO Standby with the insertion of included 3.3 kΩ resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide one output mode select rotary switch per channel that selects between 4 ohm, 8 ohm, 70 volt, 70 volt (HPF OFF), 100 volt, and 100 volt (HPF OFF)
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall include rear rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet compliances under CE, CEC, CISPR 22 Class B, C-tick, c-UL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, VCCI Class B, UL 62368-1, IEC 62368-1, and EN 62368-1 for AV equipment
      2. ENERGY STAR qualified amplifier
      3. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    4. Shall provide three year parts and labor product warranty
    5. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 4004 FX, part number 60-2034-01; no alternates or equals.

XPA U 4004 FX

Provide an energy efficient audio amplifier with low thermal dissipation that shall support four analog inputs and four amplified outputs with 400 watts rms per channel into low or high impedance systems.
1. Audio power amplifier with 400 watts rms power output per channel and power sharing between adjacent odd/even channel pairs
  1. Input Requirements
    1. Shall support four, balanced or unbalanced line level signals on four 3-pole, 3.5 mm captive screw connectors
  2. Output Requirements
    1. Shall support four speaker level signals on four 2-pole, 5 mm screw-lock captive screw connectors
    2. Shall provide 400 watts rms per channel with all channels driven
    3. Shall provide 800 watts rms per channel with one channel driven per pair
    4. Shall support rear panel selection of individual channel output modes between 8 ohms, 4 ohms, or 70 volt or 100 volt operation
    5. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    6. Shall provide a THD+N measurement of 0.1% measured at 1 kHz, at 3 dB below clipping
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    3. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    4. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 272 watts during typical (1/8 power) operation with all output channels equally driven with 4 ohm loads
    2. Shall draw 258 watts during typical (1/8 power) operation with all output channels driven with 8 ohm loads
    3. Shall draw 252 watts during typical (1/8 power) operation with all output channels driven in 70 volt mode
    4. Shall draw 245 watts during typical (1/8 power) operation with all output channels driven in 100 volt mode
    5. Shall draw 21.2 watts during quiescent operation
    6. Shall provide two low power standby modes
      1. By default, shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. When enabled, shall enter ECO Standby mode after less than 10 seconds of inactivity
      3. Shall draw less than 1 watt while in either standby mode
      4. Shall return to full power status in less than 5 milliseconds upon signal detection while in either standby mode
      5. Shall feature an input signal detection threshold of -65 dBu, +/- 3 dB on a balanced input to deactivate either standby mode
    7. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
    8. Shall meet Ecofficient Level 4 requirements
  5. Control Requirements
    1. Shall support remote standby control on a 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide a red LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide green LEDs for input signal presence indication
    4. Shall provide red LEDs for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide four inputs on four 3-pole, 3.5 mm captive screw connectors
    2. Shall provide four outputs on four 2-pole, 5 mm screw-lock captive screw connectors
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote standby control port on one 2-pole 3.5 mm captive screw connector that supports standby defeat with the insertion of included 10k ohm resistor or ECO Standby with the insertion of included 3.3 kΩ resistor
    4. Shall provide recessed, detented potentiometers with laser etched position indicators for attenuation adjustment
    5. Shall provide one output mode select rotary switch per channel that selects between 4 ohm, 8 ohm, 70 volt, 70 volt (HPF OFF), 100 volt, and 100 volt (HPF OFF)
    6. Shall provide green LEDs for input signal presence indication
    7. Shall provide red LEDs for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, full rack width metal enclosure
    2. Shall include rear rack mount hardware
    3. Shall meet regulatory compliances
      1. Shall meet compliances under CE, CEC, CISPR 22 Class B, C-tick, c-UL, European Code of Conduct, FCC Class B, ICES, RoHS, UL, VCCI Class B, UL 62368-1, IEC 62368-1, and EN 62368-1 for AV equipment
      2. ENERGY STAR qualified amplifier
      3. Shall comply with appropriate requirements of EU code of conduct, RoHS, and WEEE
    4. Shall provide three year parts and labor product warranty
    5. Shall provide seven year parts and labor power supply warranty
2. Approved device shall be the Extron XPA U 4004 FX, part number 60-2034-01; no alternates or equals.

Añadir un elemento al carro

Order Message Number

Referencia

Nota: Los productos de Extron que utilizan una salida de CA universal aceptan varios tipos de enchufes de CA. Antes de utilizarlo, asegúrese de que el dispositivo cumple con la normativa de su región y todos los estándares y reglamentos de seguridad local y electricidad.

Cant.

Total actual:

Ver carro

XPA U 4004 FX -

Detalles del producto

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

Compartir este artículo por correo electrónico

XPA U 4004 FX

Amplificador de potencia de audio de salida configurable de cuatro canales
400 W por canal

Enviar a: *

Por favor, introduzca una dirección de correo electrónico válida.

Nota:

( caracteres restantes)

Recibir una copia

Gracias. Su correo electrónico ha sido enviado.

Error al enviar el correo electrónico. Por favor, inténtelo de nuevo más tarde.